ADB3500AWS Amana Dishwasher - Parts

The rollers on the lower rack in your dishwasher allow the rack to smoothly roll in and out of the appliance. If a roller wheel has become damaged or broken off, it should be replaced so that the rack...

This authentic OEM kit includes the door handle and latch for your dishwasher. The latch is used to the keep the door secured while the appliance is operating, and will not allow the dishwasher to run...

This is a single upper dishrack and roller assembly with an integrated clip-on axle in gray. This part attaches to the dishrack and makes it possible to slide the dishrack in and out of the dishwasher...

This is the door latch and switches only. The handle is not included with this part.

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

This impeller rotates and is used to force water up through to the spray arm.

The docking station is located on the water supply tube at the far back. It provides water to the upper and middle spray arm and also includes the flappers.

Sold individually.

This is the replacement water valve for your dishwasher. The water inlet valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your d...

THE COURSE THREADED SLEEVE IS NLA SO THE KIT SHOULD NOW ONLY HAVE 1 SLEEVE 07/18KC UPGRADE TO NEW MOTOR WHICH CONTAINS SHAFT W10118627 1/14KC

This part is the replacement wash arm cap, also known as the spray arm nut, for your dishwasher. It is made of white plastic and is approximately ½ an inch in diameter. The wash arm cap fastens the lo...