HM1211B Makita Demolition Hammer - Parts

This authentic replacement ball bearing which is supplied by the original manufacturer, it is specially designed for use with Makita power tools. Ball bearings are used to reduce friction between rota...

This compression spring is a genuine Makita replacement part. It is customarily used in demolition and rotary hammers. This coil type spring is used to provide resistance to the forces compressing it....

This is a high quality item that is specially manufactured for use with Makita power tools. It is a standard hardware which has multiple used depending on the tool, please make sure to check appropria...

The pin connects to the tool retainer pole. This is a Makita replacement part directly sourced from the manufacturer for use in hammers. Keep in mind this part is made of metal and is sold individuall...

This piston ring is an authentic OEM sourced item that is specially designed for Makita demolition hammers. It is one of the rings that helps to create an air tight seal between the piston and the cyl...

This o-ring is a genuine Makita replacement part, not imitation or overstock. O-rings are made to contain thousands of PSI pressure by creating a seal between two or more parts. O-ring measurements...

This inner ring 36 is an OM part from Makita. The metal ring is designed for use with several demolition hammers. Fitted between the striker and the piston, this item provides the necessary spacing. T...

This is a genuine OEM sourced replacement o-ring which is utilized on Makita power tools. This component provides an air-tight seal between connected parts, over time the material may become brittle a...

This replacement hex nut is sourced directly from the original equipment manufacturer for use with Makita power tools. This is standard hardware which has multiple applications based on your model, pl...

It is a genuine OEM sourced item that is specially designed for use with Makita demolition hammers. The tool retainer helps to secure a bit in the chuck. If the part is damaged or missing, this will p...

This is an authentic Makita replacement part manufactured for use with demolition hammers, rotary hammers, and a masonry saw. The three wire cord is coated in a durable yet pliable jacket. The cord in...

This is a genuine OEM sourced replacement part which is specially designed for use with Makita power tools. The purpose of this strain relief is to slide onto your cord and fit securely at the end, wh...