All Installation Instructions for Whirlpool Cooktop RC8920XRH3

Customer:: gene from kent, WA
Parts Used:: 330031
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

burner not working

burner was shorting out replaced part works great

Was this instruction helpful to you?

Customer:: Robert J from Indianapolis, IN
Parts Used:: WP660532
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

When The Burner Started To Heat (Front) And Then Put The Rice Bag On The Burner. Then The Plastic Bag Began To Burn And The Bag Of Rice Began To Pour Over The Burner. Someone Tried To Clean Up On The Burner But The Burner With Plastic And Hard To Clean The Plastic Off From The Burner.

Just pull the old out from the stove and put new one on the stove and then tested the burner that is working fine. Thank you very much for order the part. Have a great day.

Was this instruction helpful to you?

Customer:: Earl from Union Mills, NC
Parts Used:: 330031
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

burner would not heat up the connection was bad

loosened the screw holding the block pulled it out toget to wire cut it about 4 inches long followed the inst.with block kit and it was a breeze. burner working fine now should have did it sooner.

Was this instruction helpful to you?

Customer:: Kevin from Desoto, MO
Parts Used:: 330031
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

two of the burners were working intermittently

I shut off the breaker checked for power then cut old plugs making sure to allow a little slack. Tightened down wire nuts put on a couple wraps of electrical tape and that was it. Burners work great now I would reccomend this product to anyone with a similar problem.

Was this instruction helpful to you?

Customer:: Gary from Chesapeake, VA
Parts Used:: 330031
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

The surface burner socket that the burner plugs into melted.

Cut the old wires off, removed the screw holding the clamp, installed the new parts. Problems I encountered were the wire nuts. They were too small for the wire gage of the replacement part and the original oven. I had larger wire nuts in my workshop. Also, why so many extra parts like the shrink wrap tubing, two metal clamps to hold the socket, etc.

Was this instruction helpful to you?

Customer:: Dallas from Arlington, TX
Parts Used:: WPW10196405
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

I needed to replace to two 8* drip bowls on the kitchen range

(a) I took out (and threw away) two stained 8* chrome drip bowls on my kitchen range; (b) ti put in two new 8" chrome drip bowls on my kitchen range. I'm pleased that I was equal to the task.

Was this instruction helpful to you?

Customer:: gizella from mays landing, NJ
Parts Used:: WPW10196405
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Old dirty drip pans

Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!

Was this instruction helpful to you?

Customer:: Charles from Villa Ridge, MO
Parts Used:: 330031
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

one burner that would not heat and others that would not out out much heat

I noticed that one of the burner blocks was completely burned and the others were corroded. I ordered blocks for all four burners. Installation was easy except for one block. The screw holding the bracket to the range top was completely corroded in place. I used a correct size easy-out, which is a left hand tap and drill, to remove the screw. That took about five minutes, including tracking the easy-out down in one of my many toolboxes. The entire replacement of four blocks took about one and a half hours. Stove top cooks like new on all burners! The part kit had all the right parts and they fit like a glove!

Was this instruction helpful to you?

Customer:: Barbara from Pacific Palisades, CA
Parts Used:: WP660532
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burner no longer connected with electric power source

I had determined that the the burner itself was no longer capable of connecting because when I removed another burner and inserted it, it worked just fine. Also, the defective burner had not worked when inserted into another outlet. I was delighted to be able to purchase a replacement so quickly and easily on my own, without having to call a repair person or seek a retail outlet.

Was this instruction helpful to you?

Customer:: Judith from Staunton, IL
Parts Used:: 330031
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Burner keep coming on and going off had a short in burner plug-in block.

Turned off stove breaker. Unscrewed burner from stove top, took out burner and spill pan. Lifted top of stove, cut the wire as instructed and put all parts together as instructed. Placed everything back together as instructed. I did it myself!

Was this instruction helpful to you?

Customer:: Erica from Ivyland borough, PA
Parts Used:: WP660532
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

replacement of heating element for elec. stove

plugged it in to the spot where missing element was.

Was this instruction helpful to you?

Customer:: Mary from Montgomery, AL
Parts Used:: 330031
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set

Top element not heating

Ordered wrong part at first caused me to blow out two elements. With the help of PartSelect I was able to get the right surface block terminal and replaced both of them, then found out I had a bad switch, they got the switch within 2 days I had my stove working good again. Thanks to PartSelect. Also watched the video which was very helpful ML

Was this instruction helpful to you?

RC8920XRH3 Whirlpool Cooktop - Instructions