Models > CSG9900AAE > Instructions

CSG9900AAE Maytag Cooktop - Instructions

Jump to:

All Instructions for the CSG9900AAE
61 - 75 of 82
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bob from Mansfield, TX
Parts Used:
74005189, WP7505P283-60
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Burners would not light - rusted
New front burners fit well, but back ones had just enough variance in tne angle of the gas-supply tube that it would not fit the mounting bracket holding both burners in place. I had to grind a small flange off of the bracket so the gas tube would clear. Once that was done the burners worked well.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harry from Cambria, CA
Parts Used:
WP7505P283-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Range burner melted plastic jar and became clogged
Found the part number on an old box, ordered the part and it arrived next day. Installed easily and is working perfectly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BOB from hartford, KY
Parts Used:
WP7505P283-60, 74005189
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
old burners wouldn't light
took old burners out, installed new ones . I was very easy and if i could do it anyone can. I used a rachet and thats the only tool i needed
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from South Lake Tahoe, CA
Parts Used:
74005189, WP7505P283-60, WP3801F403-80
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Old and stained
The repair was extremely easy. My stove still worked but looked awful. By changing out these parts it makes it look brand new.Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from Kenai, AK
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The original filter was decomposing each time I washed it
I removed the protective grid over the filter and fan, turned the clip that held the filter in place and removed it. I placed the new intact filter for my antiquated Jenn-aire in its place, replaced the protective grid, and am happily continuing to cook on my functional cook top.Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Chipley, FL
Parts Used:
WP7505P283-60, 74005189
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
only one burner on the cooktop worked
Took two screws out of each burner and put new burners in and replaced the screws. A real piece of cake. and they work great. Did not even have to adjust the flames. They were all solid blue and perfect. Bill
Was this instruction helpful to you?
Thank you for voting!
Customer:
Luciano from Hollister, CA
Parts Used:
WP7505P283-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Burner was not lighting
I removed the pan and then the burner assembly. Used a nutdriver to remove the old front burner. Replaced with the new part, tightened it on, and tested the new burner. Worked first time. Extremely easy. It took less than 5 minutes to replace.
Was this instruction helpful to you?
Thank you for voting!
Customer:
June S from San Antonio, TX
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter was very old and falling apart.
The grease filter was 20+ yrs old and the mesh was falling of the frame. I was very pleased to find this replacement filter (the first filter I received was damaged....placed a call to PartSelect and have a new one the next day). Can't beat service like that!! Thank you, June Patten
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barb from Holladay, UT
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Replacement
This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Washington, NH
Parts Used:
74005189
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
rear burner not working
removed two hexigon screws--removed old burner---placed new burner into stove socket--replaced two screws. Done in about five minutes. Most time used to fine right size socket to fit screws! Fast delivery--easy repair--AND it works!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSG9900AAE
61 - 75 of 82