KGCC566HBL1 KitchenAid Cooktop - Instructions

This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.

With no inctructions removed the counter top burner tried to figure out how to remove the glass. Next removed the burners (remember to place the burnersin a open area in the exact order you remoned them from the stove)The burners are not the same. Now the glass was acessiable to remove. The switch harness was easy to replace. Removed one switch at a time noting how the harness was routed.Remember the stove is upside down. First remove the rubber dirt sheild and washed each sheild. Note the key way on the gas adjust shaft there is a knotch on the switch that must be located and pressed in to place. Complete the 5 switches noting not to remove the termination of the harnes until the very last step. That connects to the main power. I had to cut a wire tie and replace to complete the process. Removing a burner takes a star bit to unscrew the burner from the stove top.