Models > KGCS105GSS2 > Instructions

KGCS105GSS2 KitchenAid Cooktop - Instructions

Jump to:

All Instructions for the KGCS105GSS2
16 - 22 of 22
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bonnie from Collegeville, PA
Parts Used:
WP3191923
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
lost gas top knobs
just put them on and pressed down
Was this instruction helpful to you?
Thank you for voting!
Customer:
Karen from Whispering Pines, NC
Parts Used:
814465
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
rubber protectors on gas burner grates had worn away
Removed the old rubber protectors/pads with a cake tester, new pads inserted beautifully into grates. Now my pans sit level on the grates again. Yeah!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Stephen from Ladera Ranch, CA
Parts Used:
3191293
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench set
Worn out spring assembly in valve.
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in order. Fairly straight forward.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KGCS105GSS2
16 - 22 of 22