Models > 62912104 > Instructions

62912104 Kenmore Cooktop - Instructions

Jump to:

All Instructions for the 62912104
31 - 45 of 54
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Donna from Carlsbad, CA
Parts Used:
WP705105
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
All of stove top parts grungy/peeling/burnt out
Replaced all 4 burners, grates, pans, middle grate and fan/light switch. No real "repair" except for the switch, which has two phillips screws to remove the little panel the switch is enclosed in. The fasteners holding the switch TO this panel were VERY difficult to remove, you have to destroy them to get them off! Once that is done, removed the wires from old broken switch, placed them on new switch (now attached to the panel) placed panel back in to position, replaced the two screws and DONE! It was all quite easy and the stove looks brand new now.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Jupiter, FL
Parts Used:
675544
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Drain hose cracked. Leaked and warped wood floor.
Checked fill line. No leak. Checked drain hose, found crack in hose. Ordered the part, replaced.

Removed hose clamps on drain to DM and garbage disposal. Replaced hose and tightened clamps. Checked for leaks. Buttoned up faceplate on bottom of DM.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brent from Rancho Santa Fe, CA
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Grease filter was torn and bent
I just lifted out old filter, and put in new one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Craig from Ashburn, GA
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
rotten filter for down draft vent
How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diane from Flower Mound, TX
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old yucky filter
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Henry from Vancouver, WA
Parts Used:
12200030
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace old dingy part
Part provided quickly and accurately
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Colette from Annapolis, MD
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Needed to replace the grease filter!
Followed the directions. Piece of cake!!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Norma from Salisbury, NC
Parts Used:
WP7772P007-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th
Very simple for me!!! Open the box, uncover the new grill and lay it in its place.


Thank you so much!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ann from Irvington, NY
Parts Used:
WP7772P007-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The paint had chipped and peeled on the inlet grill
I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from Ocala, FL
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Holes in the air filter of our Jenn-Air grill
Simply pulled the old filter out and put the new filter in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barb from Holladay, UT
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Replacement
This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Omaha, NE
Parts Used:
12200030
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Worn out burner grates
Lift and replace. This was the only web site that gave a picture with the correct size of the grates I was looking for. All the other sites gave approximate sizes and universal part numbers instead of the vendor part number. That is why I bought it here. I didn't want to have to return the product because it was off just a bit.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carl from Fairfax, VA
Parts Used:
12200030
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Burner Grates were old and bent out of alignment.
The repair was as easy as could be. We simply lifted off the old burner grates and set the new ones in their places.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Cayce, SC
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter worn out, exhasut fan kept going off
Old filter allowed too much air flow causing exhaust fan to go off....installed new filter in exhaust chamber...release clip on old filter and install new filter (at an angle) in the exhaust box....clamp down clip on edge of filter and job is complete
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from Kenai, AK
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The original filter was decomposing each time I washed it
I removed the protective grid over the filter and fan, turned the clip that held the filter in place and removed it. I placed the new intact filter for my antiquated Jenn-aire in its place, replaced the protective grid, and am happily continuing to cook on my functional cook top.Thank you.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 62912104
31 - 45 of 54