JGD8430ADN15 Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- CHARLES from SPRING HILL, FL
- Parts Used:
- WPW10293874, WP7737P245-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Knobs slipping
Remove old knobs and remove old grommets. Insert new grommets, install new knobs.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Philip from CONCORD, CA
- Parts Used:
- WP74009336
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Weak spark for igniting gas burner.
Removed the gas deflector; unscrewed the burner body; pulled off the ignition wire; unscrewed the bad electrode; screwed in the replacement electrode; reversed the steps. Voila! Perfect operation once again. My one mistake? Ordered the wrong electrode initially. Make sure you get the right part the first time around.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from GUTHRIE, OK
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
Knobs worn out, would not turn the post of the "D" switch.
Removed old knobs. Removed the metal insert from around the post from the old knobs with needle nose pliers. Installed new knobs. Easy fix.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from SPRING HILL, KS
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
the knobs had broken
parts came on time and the repair was just remove the old and replace with new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Sherman Oaks, CA
- Parts Used:
- WP74009336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Electronic ignitor malfunctioned
First reviewed other review on this repair. Disconnected ignitor system from electrical source (pulled plug); removed 2 screws holding casing in place; removed it from the cooktop; & removed additional screw holding ignitor. Replaced ignitor and reversed the process. Done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brian from Rancho Mirage, CA
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Being dumb enough to buy Jenn-Air appliances
I removed the old knob and replaced with a new one from the plastic package. Biggest challenge: opening the new plastic package. It if very nice to know you have many of the parts I will need over the next 20 years.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jacob V from Houston, TX
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken stove knobs
remove old knob, plce new knob on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Juan J, from UNIVERSAL CTY, TX
- Parts Used:
- 74007735
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Needed use of penetrate lubrication
Removed two screw securing wburner and disengage igniter.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karen from FAIRMOUNT, IL
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
One was broken when bought house
Took old knobs off & put new ones on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charlie from Willis, TX
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
cracked knob
put new knob on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edgar from COCKEYSVILLE, MD
- Parts Used:
- WP74009336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Ignitor sparking at bottom, not the top
Removed two star screws from the top of the burner, disconnected the wire going to the Ignitor, removed the old ignitor held in with one phillips screw, installed new ignitor and re-installed the burner assembly. Simple!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Mesa, AZ
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Burner nob broken
Popped the old one off and installed the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Grenada, MS
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken knobs
First I removed the old damaged knobs by pulling upward on the knobs. Then I replaced the damaged knobs with the new knobs being careful to align the male and female connection. After installation I tested each burner for proper operation. As a final test, I asked my wife for her opinion. We're happy!
Charles & Dorothy
Charles & Dorothy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joanne from BRANCHBURG, NJ
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
The knob does not go down; it sticks up too high. Question? Maybe knob is not for position 2. Does it matter which place you put it on?
I tried to put knob on number 2 location. Looks like I need number 1 knob.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pat from MCKINNEY, TX
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
Knobs for the cooktop burners did not fit so I have returned them and still do not have use of all burners due to lack of knobs
Could not put a square peg into a round hole....parts did not fit and I do not know how to find the model number but the knob has two flat sides.l....the knobs you sent did not.
Was this instruction helpful to you?
Thank you for voting!