JGD8430ADB14 Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- KEN from REDDING, CA
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Knob
Take old off and put new on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Port Charlotte, FL
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
cracked knob on stovetop
the cracked knob left the round piece of metal that is part of the knob inside the stovetop, preventing the new knob from being installed at the right height. We were able to remove the metal piece and place the new knob on at the correct height. We were very pleased at how fast the part was received.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Whitesboro, TX
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Burner Knobs would crack in the middle
The original knobs were poorly made and kept braking. After the third set, which were very expensive for some plastic knobs, I read this web page for help. Based on what I learned and what I read, I glued the metal sleeve in the knob shaft with some super glue. I then wrapped the shaft with copper wire and spread some industrial glue over the copper wrapping, which looked like a spring around the shaft. I have had no problems in the last month. I hope it keeps up.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerry W. from Weiser, ID
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken knobs on the drop in range top.
My son that is now in the Army National Guard was rather rough on the knobs for the range. Instead of pushing down and then turning, he would just turn the knobs and broke three of them. I only had one left that would operate all of the burners. I searched all over the local area and could not find any replacements for them. I went to the internet and found your site and the exact knobs I needed to replace the broken ones with. I received the new knobs in the mail and then put them on the range. It is nice to have knobs that actually work and it makes cooking much easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles from Grenada, MS
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Burner knobs broken
Lifted upwards on old knobs to remove then aligned new knobs fittings, pressed downward to instal new knobs. Really easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Royse City, TX
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
2 of the burner knobs were loose, could not turn eyes on.
Took off the old knobs, replaced with new ones.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Matthew from Portland, OR
- Parts Used:
- WP7737P245-60, WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Control know for one burner and fan broke.
Supper easy to replace. Biggest thing is that knobs are not well made and break easily. Better buys some extras.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- FRED from Flower Mound, TX
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Former Burner Knob was broken
Pulled old ones off and replaced new ones by pushing them on the spindles. Very easy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Curtis from Gilbert, AZ
- Parts Used:
- WP7737P245-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken plastic chrome knobs
bought new ones and pushed them onto D shaped posts total time 90 seconds they may break again in 10 years but I am to lazy to reinforce them
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Katherine from dayton, WA
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original Burner Knob broke at the shaft
Simply took off the original knob and replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Sanbornton, NH
- Parts Used:
- WP74009336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
burner igniter didn't light burner
I removed the burner by unscrewing 2 torx head screws, disconnected wire from electrode, removed screw holding electrode, inserted new electrode,connected wire, installed burner and fired it up.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Diane from Monee, IL
- Parts Used:
- 74007736
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Burner did not light
Ordered online Tuesday, delivery by FedEx on Wednesday. Removed the old "popped" in the new and it worked right away. It was that simple. Thanks so much.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sara from Mahtomedi, MN
- Parts Used:
- WP7733P410-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Knobs were damaged/distorted due to wear
Pulled off the old knobs, pushed the new ones on. Could not have been easier!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Carson City, NV
- Parts Used:
- WP74009336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Damaged Ignitor
Simply unscrewed the old one and installed the new one and we have ignition!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Deer Park, IL
- Parts Used:
- WP74009336
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench set
Burner electrode was damaged during cleaning
A crack in the porcelain caused the spark to not go in the proper direction, therefore the burner would not ignite. To have the job done by a professional would have cost $200.00 plus parts. Remove two phillips screws lift the burner out then remove the one phillips screw that held the electrode. Then with the new electrode in place reverse the previous steps.
Was this instruction helpful to you?
Thank you for voting!