Models > JED8230ADS16 > Instructions

JED8230ADS16 Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the JED8230ADS16
76 - 90 of 171
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Karen from Bethlehem, CT
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The front burned had stopped working completely.
All I had to do was remove the old insert with the two burners in it and clean under it, then insert the new one! It was really simple. I didn't even need my husband to help!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
vivian from west orange, NJ
Parts Used:
JEA7000ADBA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
part shorted out due to rust
easy...opened box and plugged it in.....
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Baton Rouge, LA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
wire on one of the burners was frayed and exposed
took old burner out and put in new burner. No problem. Easy greasy
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Mountain Iron, MN
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old grease filter had hole wore through
Pulled the old one out & inserted the new one. Less than five minutes.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from New Plymouth, ID
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the elements were old and I only had one set, but had the grill
I just had to pull the old ones out, and pop in the new ones. It took longer to get them out of the box, than to replace them. Thank You for your fast ordering and shipping.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
bintu from brinkley, AR
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
cook top is not working
i just order new cartridge and just plug in
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kenia from Miramar, FL
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replace grill elements with convention coil elements
Easy as 1-2-3. Opened the box, took out the new electric coil elements, plugged it in to our stove and it worked perfectly.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JohnPaul from Ft. Bragg, CA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Redona from Roseville, CA
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Worn out stove top
We replaced the burner grates, knobs, air filter and burner pan. Looks as good as new!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Toledo, OH
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
My stove is a 1985 model and the coils did not heat evenly any more.
When I called to inquire if a new cartrige would fit in my 1985 model range the gentleman walked me through unplugging the old cartrige to see how it connected. I did this while on the phone with him and I then explained the connection; he told me that a new cartrige would just plug into the same place....and it did!
You had a great person at your service desk.
Thank you
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Albert from Annapolis, NC
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
none
no problem
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sophie from Warrenton, VA
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter needed replacement. Old one was falling apart.
Removed old filter, dropped in the new one.
(This really was not a "repair")
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harriet from Coppell, TX
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Our coil elements were looking worn.
We took out the old element cartridges, and plugged in the new cartridges. It was easy, and made our cook top look fantastic!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Johnny from Trinity, NC
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
coil element not working
plugged the new one in and it was ready to use
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John Davenport from Upper Black Eddy, PA
Parts Used:
JEA7000ADSA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Old cartridge burner plate connectors had failed
Simply bought a new cartridge, pulled the old one out and put in the new one. The best thing was that I used another cartridge bottom to replace the bad connectors on the still shiny top and then had two good looking cartridge tops.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JED8230ADS16
76 - 90 of 171