All Installation Instructions for Jenn-Air Cooktop CG206L-C

Customer:: Diane from Flower Mound, TX
Parts Used:: WP707929
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

old yucky filter

Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!

0 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Daniel from Fort Walton Beach, FL
Parts Used:: 12001129
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Downdraft switch on the top of the JennAir inkoperative.

I verified that there was current running to the switch.
Ordered a new switch,
Replaced the switch.
Had a little problem getting the oneway washers off the pegs but not much.
Saved the cost of a repair man and felt good about myself!

0 of 3 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Ann from Irvington, NY
Parts Used:: WP7772P007-60
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

The paint had chipped and peeled on the inlet grill

I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!

0 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Jeffrey from Columbus, GA
Parts Used:: 1430322
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

Front burners would not light.

First, unplugged the cooktop from outlet and shut off gas. Then, removed burner assembly then located and removed existing spark module. Installed new spark module kit, reassembled burner assembly and then plugged unit into electricity and turned gas on. Was rewarded when testing burners with an instant ignition.

Was this instruction helpful to you?

Customer:: June S from San Antonio, TX
Parts Used:: WP707929
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Filter was very old and falling apart.

The grease filter was 20+ yrs old and the mesh was falling of the frame. I was very pleased to find this replacement filter (the first filter I received was damaged....placed a call to PartSelect and have a new one the next day). Can't beat service like that!! Thank you, June Patten

Was this instruction helpful to you?

Customer:: William M. from Rock Hill, SC
Parts Used:: WP71001641
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Nroken Burnner knob

Slide the knob onto the shaft.

Was this instruction helpful to you?

Customer:: Gayle from Whitefish, MT
Parts Used:: WP71001641
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

one of my Jenn Air knobs melted (gas range top)

pried off the old knob with hubby's needle nosed Leatherman pliers and popped the new one on!

Was this instruction helpful to you?

Customer:: Janice from Ocala, FL
Parts Used:: WP707929
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Holes in the air filter of our Jenn-Air grill

Simply pulled the old filter out and put the new filter in.

Was this instruction helpful to you?

Customer:: Brenda from New Market, MD
Parts Used:: WP71002179
Difficulty Level:: Easy
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Screw drivers, Wrench (Adjustable)

One set of burners would not ignite.

This range is about 17 years old and the igniter on the left set of burners had failed in the first month of use. A warranty repairman came, made a big mess, marred the adjacent counter top, spent a lot of time badmouthing Jenn-Air and left without fixing the problem. We have been manually lighting these burners all this time. Now that I am retired, I have set about repairing everything I can get my hands on just to have things to do. I always did this when I was young but got too busy with career and family. One big help is doing things now is you can Google a problem, find parts and instructions how to make the repair which is much easier than all the research you used to have to do. This repair is easy but time consuming due to all the screws that you have to remove to get to the igniter and the controller in the back. Since one side worked I was confident that the controller was good but the problem was only the igniter on the left side. This range is a dual fuel unit and has a downdraft connection so sliding it out from the wall is also time consuming. First pull the breaker at the electric panel. Remove the bottom plate and disconnect the flexible downdraft connection. Hopefully, you have enough flexible gas line so you can slide stove out to reach the back without having to shut off the gas and removing the connection. Next you remove the grills and burners. Then you have to remove all the screws connecting the top of the stove. There are nuts and washers that surround the gas jets that you can remove to partially lift the drip pan so you can unscrew the old igniter and install the new one. Next remove the back and see where the igniter control is located. Disconnect the old wire, install the new wire in the guides and insert in the controller. At this point all you need to do is put everything back where it was. This does not take a lot of know-how just time and patience. It makes you wonder why an "expert" could not have done this easily.

Was this instruction helpful to you?

Customer:: JUDY from HACIENDA HEIGHTS, CA
Parts Used:: WP71001641
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Need Knobs For Electric Stove-Top

I did not have the model number and thought I picked the correct knob by the picture. I sent back the knobs and one of my knobs to see if the company can match.

Was this instruction helpful to you?

Customer:: Robert from Tracy, CA
Parts Used:: WP71001641
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broke original Knob

Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.

Was this instruction helpful to you?

Customer:: Barb from Holladay, UT
Parts Used:: WP707929
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

Replacement

This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,

Was this instruction helpful to you?

Customer:: Peter from Foster City, CA
Parts Used:: WP71001641
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Burner knob replacement

Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)

Was this instruction helpful to you?

Customer:: Thomas from Tucson, AZ
Parts Used:: WP71001641
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

burner knobs were melted beyond repair.

Replaced the old knobs with the new ones.

Was this instruction helpful to you?

Customer:: John from Cayce, SC
Parts Used:: WP707929
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Filter worn out, exhasut fan kept going off

Old filter allowed too much air flow causing exhaust fan to go off....installed new filter in exhaust chamber...release clip on old filter and install new filter (at an angle) in the exhaust box....clamp down clip on edge of filter and job is complete

Was this instruction helpful to you?

CG206L-C Jenn-Air Cooktop - Instructions