Models > JED8430BDB > Instructions

JED8430BDB Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the JED8430BDB
31 - 45 of 59
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Sacramento, CA
Parts Used:
WP7739P122-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Knob on the exhaust fan was broken
Simply removed old knob and replaced.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Northville, MI
Parts Used:
WP7739P122-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
sticking/broken pop up knob
I used needle nose pliers to remove the broken piece then pushed the new knob on!!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rita from Leesburg, VA
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replace old grease filter
very easy slip in
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roberto from Zapata, TX
Parts Used:
71003476
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench set
Fan not working
Opened the top section of the stove. Re-routed wires to be connected from the speed control device into the new cord. And done. Put everything back thogether.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gary from Dana Point, CA
Parts Used:
WP7739P122-60
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
I didn't end up with the correct item
I ordered a switch and got a switch knob. So it is still not working.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from San Antonio, TX
Parts Used:
W11088181
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Surface Burner Short
Removed the cook top from the counter. Removed the switch housing and then the switch. Found a match and ordered. Part came in 2 business days. Once I put together the housing and connected the wire housing the burner worked perfect. The downdraft fan remained on. Placed a call to Jenn Air service and was asked to disconnect the fan switch. There must be some memory in the solid state portion of the switch. After a few mins I replaced the fan switch and hooked up the wiring. All worked fine.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Yulanda from Fairburn, GA
Parts Used:
WP74010839
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replacement of broken knobs
open packaging and placed knobs on stems of the cooktop.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from Long Beach, WA
Parts Used:
WP7739P122-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Fan swith poped out -couldn't replace it
Ordered new part--on line help said pull all remaining parts out--small pair of plyers and yanked internal parts out--the new part just slipped down over the u-post and back in business--couldn't have been easier
Was this instruction helpful to you?
Thank you for voting!
Customer:
Eddie from Loyall, KY
Parts Used:
W11088181
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Water boiled over burnt out switch
Knocked breaker removed stove top from iland removed a dozen screws replaced switch put screws back in installed top back in iland put breaker back in worked purfect.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from Soddy Daisy, TN
Parts Used:
WP7739P122-60
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Fan knob would not pop up as designed.
Removed old knob by pulling straight up. The shaft the knob fits on is D shaped. Simple align knob with D on shaft and push down. Problem solved.
Was this instruction helpful to you?
Thank you for voting!
Customer:
larry from houston, TX
Parts Used:
W11088181
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
burner switch broken
turned off power to stove top..lifted unit out unscrewed top and switch had 2 screws re-placed switch and put back together.. make easy $100 plus switch
Was this instruction helpful to you?
Thank you for voting!
Customer:
Kathy from Gurnee, IL
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Elizabeth from Hudson, OH
Parts Used:
WP74010839, 71003481
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Lost one turner knob and others were a mess. Center airgrille was getting old and discolored
Just slipped the perfect parts in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allen from Winchester, TN
Parts Used:
WP7739P122-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Replace broken fan knob
Only had to get long-nosed pliers to pull remains of broken knob from cavity. New knob was easy push-on and repair was completed!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Judith from Lady Lake, AL
Parts Used:
WPY706012
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Needed new grease filter
The old grease filter was removed and the entire downdraft was cleaned. The new filter was slipped in. It is so nice to have the old one out. I am so appreciative of finding this part. :-)
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the JED8430BDB
31 - 45 of 59