Models > CG100B > Instructions

CG100B Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the CG100B
76 - 90 of 121
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Brent from Rancho Santa Fe, CA
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Grease filter was torn and bent
I just lifted out old filter, and put in new one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Norma from Salisbury, NC
Parts Used:
WP7772P007-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The paint begin popping of my original grill. My son had a friend that said that he could remove the old paint and repaint for me. Unfortunately in the shuffle of a motorcycle performance shop the grill was lost. I have been trying to get help from Jenn-Aire since March and they just kept saying th
Very simple for me!!! Open the box, uncover the new grill and lay it in its place.


Thank you so much!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Craig from Ashburn, GA
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
rotten filter for down draft vent
How I did the repair is no consequence. The service of easily finding the part on your site is GREAT! and the shipping time more than reasonable! Thanks!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Colette from Annapolis, MD
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Needed to replace the grease filter!
Followed the directions. Piece of cake!!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Don from Exchange, WV
Parts Used:
WP74008014
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Broken hinge
Took the door apart and replaced the hinge, very easy
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diane from Flower Mound, TX
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
old yucky filter
Thanks, have been looking for a replacement for this dinosaur filter forever. It is great!
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Daniel from Fort Walton Beach, FL
Parts Used:
12001129
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Downdraft switch on the top of the JennAir inkoperative.
I verified that there was current running to the switch.
Ordered a new switch,
Replaced the switch.
Had a little problem getting the oneway washers off the pegs but not much.
Saved the cost of a repair man and felt good about myself!
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ann from Irvington, NY
Parts Used:
WP7772P007-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The paint had chipped and peeled on the inlet grill
I lifted off the old grill and replaced them with the new ones. My stove top looks great again. If I could find them, I would like to replace the knobs to turn on the gas!
0 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharon from Kenai, AK
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The original filter was decomposing each time I washed it
I removed the protective grid over the filter and fan, turned the clip that held the filter in place and removed it. I placed the new intact filter for my antiquated Jenn-aire in its place, replaced the protective grid, and am happily continuing to cook on my functional cook top.Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joan from Egg Harbor, WI
Parts Used:
WP71001641
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
One burner knob melted and one had a broken "stem"
Pop off the old and on with the new. Took longer to open the plastic packaging each came in than to remove & replace old knob with new.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Cayce, SC
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter worn out, exhasut fan kept going off
Old filter allowed too much air flow causing exhaust fan to go off....installed new filter in exhaust chamber...release clip on old filter and install new filter (at an angle) in the exhaust box....clamp down clip on edge of filter and job is complete
Was this instruction helpful to you?
Thank you for voting!
Customer:
June S from San Antonio, TX
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter was very old and falling apart.
The grease filter was 20+ yrs old and the mesh was falling of the frame. I was very pleased to find this replacement filter (the first filter I received was damaged....placed a call to PartSelect and have a new one the next day). Can't beat service like that!! Thank you, June Patten
Was this instruction helpful to you?
Thank you for voting!
Customer:
richard from white castle, LA
Parts Used:
707704K, WPY707985
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench set
bearing went out in blower motor
removed old motor from cooktop & motor housing & replaced w/ new motor & parts to install same. parts needed where screws & isolators (3).All went ok
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffrey from Columbus, GA
Parts Used:
1430322
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Front burners would not light.
First, unplugged the cooktop from outlet and shut off gas. Then, removed burner assembly then located and removed existing spark module. Installed new spark module kit, reassembled burner assembly and then plugged unit into electricity and turned gas on. Was rewarded when testing burners with an instant ignition.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dolores from Penrose, CO
Parts Used:
WP74008014
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
hinge broke on bottom oven door.
sorry, son did job. It went like a charm. Easy, quick, and works great.Thanks
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CG100B
76 - 90 of 121