CVE3401B Jenn-Air Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dolores from Roseville, CA
- Parts Used:
- WP74009592
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
knob cracked when touched by hot pan
pulled damaged knob off and inserted new knob
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kim from Cottontown, TN
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Nasty, clogged, old grease filter
I carefully removed the disgusting old filter and took straight to trash. I then used my wet/dry vacuum to clean the rest of the loose debris from the area where the filter area is located. I used a clean, dry cloth to wipe the remainder of the material away and then carefully lowered the clean new filter down into it's new home. So easy, it took longer to type out these directions :)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dwayne from Holland, MI
- Parts Used:
- WP74009592
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Surface knob was slightly melted.
Knob that I ordered fit perfectly. I ordered the knob at 11:00 A.M. one day and received it less than 24 hours later. Awesome.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Long Beach, WA
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Fan swith poped out -couldn't replace it
Ordered new part--on line help said pull all remaining parts out--small pair of plyers and yanked internal parts out--the new part just slipped down over the u-post and back in business--couldn't have been easier
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathy from Gurnee, IL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our old grease filter was molding
Took the old filter out and put a new one in. No tools no fuss no muss. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Allen from Winchester, TN
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Replace broken fan knob
Only had to get long-nosed pliers to pull remains of broken knob from cavity. New knob was easy push-on and repair was completed!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cyril from Cincinnati, OH
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Fan Knob didn't operate fan or retract
Part is a new design. Had to remove all the housing for the old knob. Don't leave anything in the hole. A bit apprehensive, but it works great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Raymond from Soddy Daisy, TN
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Fan knob would not pop up as designed.
Removed old knob by pulling straight up. The shaft the knob fits on is D shaped. Simple align knob with D on shaft and push down. Problem solved.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Bend, OR
- Parts Used:
- 12002125
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
The dual surface burner would come on and go off intermittently when the switch was turned to off.
Thanks to the highest rated user comment and following his instructions the switch exchange was easy. The supplied instructions were of little to no help and confusing. The hardest part was getting to the two side top Phillips screws because the granite counter top was in the way necessitating raising the stove till the screw heads were exposed. Once raised the front cover was easily removed after undoing six screws. The cook top did not need to be removed. Either of the supplied wires would work and only one of the two was needed. The replacement switch performed far better than the original.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Judith from Lady Lake, AL
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new grease filter
The old grease filter was removed and the entire downdraft was cleaned. The new filter was slipped in. It is so nice to have the old one out. I am so appreciative of finding this part. :-)
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Mount Sinai, NY
- Parts Used:
- WPY706012
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
replacement filter for jenn-aire
the filter fit because the scale in the photo allowed me to choose which one to buy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bill from Newburgh, IN
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Original fan knob was broken
Repair was simple thanks to feedback from this site.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Yelena from San Francisco, CA
- Parts Used:
- W10823704
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
The front left side burner was broken.
We lifted the glass top, uninstalled the old burner and installed the new burner in it's place. It worked right away - and is still working. No other tricks the new burner was a perfect fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michelle from Fairfax, VA
- Parts Used:
- WP7739P122-60
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Fan Knob
This repair was extremely easy. I was able to lift off the broken fan knob with some pliers. The new knob easily fit and the new knob works like a dream!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arturo from Enid, OK
- Parts Used:
- W10823709
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The radiant filament is broken.
Remove the connectors (ID where it goes on the new item). Unscrew the two screws and remove the broken radiant filaments. Install and screw the new radiant filaments; then, connect back the connectors to it's proper connections.
Was this instruction helpful to you?
Thank you for voting!