Models > CVG4280B > Instructions

CVG4280B Jenn-Air Cooktop - Instructions

Jump to:

All Instructions for the CVG4280B
91 - 105 of 129
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Bob from Mansfield, TX
Parts Used:
74005189, WP7505P283-60
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Burners would not light - rusted
New front burners fit well, but back ones had just enough variance in tne angle of the gas-supply tube that it would not fit the mounting bracket holding both burners in place. I had to grind a small flange off of the bracket so the gas tube would clear. Once that was done the burners worked well.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from Carlstadt, NJ
Parts Used:
WP7505P283-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
replacing old parts
wanted a fresh clean look on the burners since they were old and getting dirty and blackened from use. Easy to replace with new one.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harry from Cambria, CA
Parts Used:
WP7505P283-60
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Range burner melted plastic jar and became clogged
Found the part number on an old box, ordered the part and it arrived next day. Installed easily and is working perfectly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
BOB from hartford, KY
Parts Used:
WP7505P283-60, 74005189
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
old burners wouldn't light
took old burners out, installed new ones . I was very easy and if i could do it anyone can. I used a rachet and thats the only tool i needed
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan from South Lake Tahoe, CA
Parts Used:
74005189, WP7505P283-60, WP3801F403-80
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Old and stained
The repair was extremely easy. My stove still worked but looked awful. By changing out these parts it makes it look brand new.Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
kathryn from batavia, OH
Parts Used:
W10341820
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
fan switch blew fuse & burned wires to switch.
take off frt of stove around burner knobs, remove old switch, put on new, replace frt of stove. Fast, easy & look at your savings!
Was this instruction helpful to you?
Thank you for voting!
Customer:
felton from sunset, LA
Parts Used:
W10341820
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Fan Switch burned out on Jenn-Air stovetop
The original fan switch for down draft stove top was discontinued! I found a replacement switch which worked just fine! I received switch and 2 different type replacement plates! One an exact match! Switch different but worked fine! I had to make no modification! Changed I'm about 10 minutes! I was lucky from what I read on other customers' responses!! They wouldn't promise me it would work!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
JUDY from HACIENDA HEIGHTS, CA
Parts Used:
WP71001641
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Need Knobs For Electric Stove-Top
I did not have the model number and thought I picked the correct knob by the picture. I sent back the knobs and one of my knobs to see if the company can match.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gayle from Whitefish, MT
Parts Used:
WP71001641
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
one of my Jenn Air knobs melted (gas range top)
pried off the old knob with hubby's needle nosed Leatherman pliers and popped the new one on!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Janice from Ocala, FL
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Holes in the air filter of our Jenn-Air grill
Simply pulled the old filter out and put the new filter in.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Tracy, CA
Parts Used:
WP71001641
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broke original Knob
Hardest part of repair was ordering part. The knob arrived the day after my placing order. Not rocket science to replace burner knob.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barb from Holladay, UT
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Replacement
This down draft filter was just what I was looking for. The big box stores (Home Depot and Lowe's) do not carry this size filter. Thanks,
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from Foster City, CA
Parts Used:
WP71001641
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Burner knob replacement
Inserted new knob on to the stem... very difficult operation taking a great amount of skill. ;-)
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Tucson, AZ
Parts Used:
WP71001641
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
burner knobs were melted beyond repair.
Replaced the old knobs with the new ones.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Cayce, SC
Parts Used:
WP707929
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter worn out, exhasut fan kept going off
Old filter allowed too much air flow causing exhaust fan to go off....installed new filter in exhaust chamber...release clip on old filter and install new filter (at an angle) in the exhaust box....clamp down clip on edge of filter and job is complete
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CVG4280B
91 - 105 of 129