SGM466BLP Dacor Cooktop - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Joyce from HARRISON, NY
- Parts Used:
- DE81-08738A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Old knob cracked and needed to be replaced
I feel very silly doing this. I'm 76 year old female and always, well most always did home my own home repair. This was a no brainer, a 4 year old child could do it......I just had to find the right replacement knob, order it and when it arrived I put it in the place where the first one was missing. :-) Just trying to be silly here....he he
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marcy Mahoney from GRAND JCT, CO
- Parts Used:
- DE81-10313A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
LOVE this stovetop and want to keep it as it works beautifully!
The main issue was getting actual knobs for a cooktop that is well over 21 years old. Clearly I am the first to really cook on it!
These are the proper fit. Two were broken. Easy to simply lineup and push down to install.
The main point I would like to make is the Wonderful Woman who took my call and basically searched for the knobs. Thank you Thankyou!
These are the proper fit. Two were broken. Easy to simply lineup and push down to install.
The main point I would like to make is the Wonderful Woman who took my call and basically searched for the knobs. Thank you Thankyou!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from MIAMI, FL
- Parts Used:
- DE81-06694A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Flame was not even all around.
Cleaned the brass ring and replaced the cap.
New brass rings may be an improvement too.
New brass rings may be an improvement too.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kerry from WALKERTON, IN
- Parts Used:
- WP63235
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
agitator spin freely by hand. plastic splines striped out
remove cap on top of agitator, use socket with extension to remove bolt. pull up to remove old agitator, reverse order to install new part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from PAYSON, AZ
- Parts Used:
- WP63235
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
agitator not working, Striped splines.
replace washer agitator. One bolt.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from BRUCETON MLS, WV
- Parts Used:
- WP63235
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
The agitator was not spinning.
I took a straight screwdriver and popped off the cap on top of agitator. Then used a ratchet with an extender and loosened and took out the bolt in the agitator. Then pulled the agitator straight up and inserted the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bruce from FRIDAY HARBOR, WA
- Parts Used:
- DE81-08738A
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Gas burner knob broke
Snapped the new one on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Doris from Faucett, MO
- Parts Used:
- WP63235
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Would not agitate
Plastic "teeth" at top of agitator were completely worn off, allowing the agitator to spin freely on the shaft. Just remove the bolt that connects the agitator to the drive shaft (located under the top cap of the agitator), remove and replace agitator and you're all set.
Was this instruction helpful to you?
Thank you for voting!