5KSB52BGR5 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Joseph from Raleigh, NC
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rubber on coupling had broken off
using the screw driver I pryed up on the old coupling as out line in the instructions that came with the part. The old part cam off easily and the new one just screwed on. The replacement took only a few minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomasine from WAYNE, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The original drive coupling disintegrated
I repaired it as per instructions provided by using a flat head screwdriver to pry the original off.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from hawthorne, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
coupler wore out
i used the screwdriver method prying up on side to side old one comes off new one goes on pretty cool also it was a nice long flat head with pretty big head
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Naples, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
blender coupler was worn down
Using the precise instructions provided by parts select, I used a big screw driver and pried off the old coupler and cleaned the area and screwed on the new coupler. Fixed!
The part finally arrived 3 weeks later, after being out of stock and back ordered a couple times.
The part finally arrived 3 weeks later, after being out of stock and back ordered a couple times.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Long Beach, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
replace the drive coupling
I couldn't unscrew the old coupling (left hand thread) so I carefully sawed a piece off being careful (the somewhat difficult part of the job) not to damage the threads on the drive motor. Then I used pliers to remove the rest of the drive coupling. Then it's just a matter of screwing on the new coupling. Good as new and I didn't have to buy a new $150 blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Polly from Southampton, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Drive coupling wore out
It was harder than the directions said to get the old drive coupling off, but once the old was taken off, it was a piece of cake to put the new one on.
Thanks, great service from this website, received my part the next day after I ordered it!
Thanks, great service from this website, received my part the next day after I ordered it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Corona, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rubber drive coupling on blender broke apart
Followed the instructions that came with the replacement drive coupler, first removeing the old part using a screw driver, and then easily screwed on the new part. Removing the old part without the aid of the instructions would have been problematic.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anacleto from West Newton, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
old drive coupling was worn out
I just followed the instructions to remove the old drive coupling and screwed in the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- prasad from cave junction, OR
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
worn drive coupling
Pry off the old, clean up drive threads, thread on the new one. easy as pie
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alberto from Amherst, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The drive coupling (what turns the blender) lost all teeths
Watched the video on the site on how to remove the old one and install the new one and it took me all of 5 minutes, at most. I almost threw it away. Super cheap repair. The product arrived in 2 days too. I am saving the site. They are great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from Stony Brook, NY
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Drive coupling had broken teeth
Forget about the repair blogs. The coupling includes a repair instruction sheet. It actually took longer to read the sheet than it did to do the repair. Follow the repair sheet instructions. Very easy, however not intuitive.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kathy from fox island, WA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The part broke and the blender wouldn't operate correctly. ctlly.
After I discovered that it needed to be screwed on turning to the left it was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- refugio from san francisco, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old coupling got broken
it was too easy, i only used my hand to screw the coupling to the blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Albert from Frenchtown, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Coupler broken
It was very easy to unscrew the coupler I used locktight to put on the new part. Thank you sending
the right part the first time
Albert
the right part the first time
Albert
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Athens, GA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cup drive on blender was stripped.
Released cup drive with screw driver and un-screwed, screwed on new driver.
That is all, works like a new blender.
That is all, works like a new blender.
Was this instruction helpful to you?
Thank you for voting!