5KSB52EGR4 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Tom from West Palm Beach, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The drive wheel had worn teeth
The replacement part arrived so swiftly I didn't know what it was until I opened the packet.
The motor drive shaft has two flanges on it that can accept a narrow wrench and the drive wheel can be screwed off clockwise!
Alternatively the drive wheel can be easily prised off and the drive wheel screwed on anti-clockwise thread.
Success
Of course if the drive wheel was made of a more durable material this would not have been a problem unfortunately typically american not made to last!
The motor drive shaft has two flanges on it that can accept a narrow wrench and the drive wheel can be screwed off clockwise!
Alternatively the drive wheel can be easily prised off and the drive wheel screwed on anti-clockwise thread.
Success
Of course if the drive wheel was made of a more durable material this would not have been a problem unfortunately typically american not made to last!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Albert from Frenchtown, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Coupler broken
It was very easy to unscrew the coupler I used locktight to put on the new part. Thank you sending
the right part the first time
Albert
the right part the first time
Albert
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Athens, GA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cup drive on blender was stripped.
Released cup drive with screw driver and un-screwed, screwed on new driver.
That is all, works like a new blender.
That is all, works like a new blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- refugio from san francisco, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old coupling got broken
it was too easy, i only used my hand to screw the coupling to the blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jerome from Salem, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
The coupling teeth on the blender broke off when it wasn't seated properly
After reading repair stories on this site, I used wire splicers that just fit between the coupling and housing to hold the shaft while I used pliers to remove the broken coupling. I then hand tightened the new one . It works fine now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maryann from Pawtucket, RI
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
So Easy
The coupling split apart on my Kitchenaid Blender. I ordered the coupling part and "Bingo", I was back in business. It took no time at all and one screwdriver. I saved penty of money by not having to buy a new appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from Poway, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The rubber coupling that spins the blender dessinagrated
Popped off the old one and popped on the new one. It took no more then 30 seconds and the blender is like new again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ernestine from Madison, ME
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
coupling had broken a couple of pieces off
Intructions were simple. Pried off the old coupling with the screwdriver and applied presser to replace the new one on the spindle.
Comment: KitchenAid appliances are made to last unlike most other small kitchen appliances. They are made of strong materials and repairable where as other similar products get thrown out when they break.
Comment: KitchenAid appliances are made to last unlike most other small kitchen appliances. They are made of strong materials and repairable where as other similar products get thrown out when they break.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mario from Virginia Beach, VA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
coupling's two extrusions broken
with a flat wrench grab the shaft and unscrew the coupling (note: left handed threads)... then install the replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Corona, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rubber drive coupling on blender broke apart
Followed the instructions that came with the replacement drive coupler, first removeing the old part using a screw driver, and then easily screwed on the new part. Removing the old part without the aid of the instructions would have been problematic.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brenda from Lindsey, OH
- Parts Used:
- WP9704230
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
drive coupler was chewed up from improperly placing blender on it.
place screwdriver under old coupler and pried up on it in different spots until it popped off. Took less than 5 min. to do.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elliott from Surprise, AZ
- Parts Used:
- WP9704230
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Coupling worn out
Simply followed the online video instructions. Screwdriver to remove the worn out part. Rag to clean threads. Hand tighten replacement part (reverse threads). Blender fully functional. Couldn't have been easier.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Levittown, PA
- Parts Used:
- WP9704230
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Teeth broke off o the drive coupling
Pried the old coupling off and unscrewed the metal piece remaining then screwed the new coupling on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Chris from hawthorne, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
coupler wore out
i used the screwdriver method prying up on side to side old one comes off new one goes on pretty cool also it was a nice long flat head with pretty big head
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomasine from WAYNE, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The original drive coupling disintegrated
I repaired it as per instructions provided by using a flat head screwdriver to pry the original off.
Was this instruction helpful to you?
Thank you for voting!