5KSB5553EBU0 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- cesar from saugus, CA
- Parts Used:
- WPW10686132, WPW10500387
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Leaking base and silicone seal
Just swapped out parts and no more leak. I figured out the leak was around the blades and the nut holding it together wasn't staying tight. New parts fit perfect. No tools.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Geneseo, NY
- Parts Used:
- WPW10279256
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The driver (coupling) on my Kitchenaid Blender disintegrated.
I decided to see if I could dislodge the faulty coupling. I placed a screw driver under the coupling and pushed up. It dislodged. Subsequently I found a youtube video that indicated that was exactly what I should do.
I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
I ordered the part from parts select and placed the coupling on my blender. It screws in counterclockwise. It works fine. I am very satisfied.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- NARDIS from DORAL, FL
- Parts Used:
- WPW10500386
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
Change of collar Kitchenaid's Blender
Just unscrew the jar from the collar and screw the new collar with the jar aagain.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sean from NEWARK, DE
- Parts Used:
- WPW10500386
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The left hand threaded but losses torque and allows the shaft to "wobble"
Twist the bottom collar off toss in trash receptacle. Install new collar, insure seal is properly seated and twist on, it will be a tad hard at first but will loosen with use. When you clean the collar check to make sure the nut is tight to insure life long use. Or you will be purchasing another unit very soon.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from MOUNT MORRIS, MI
- Parts Used:
- WPW10279256
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Timer went out would just run and run
Replaced the timer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- shelley from Homer, AK
- Parts Used:
- WPW10279256
- Difficulty Level:
- Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Pliers, Screw drivers
coupling got chewed up
to replace the coupling you take the bottom off the blender and loosen the screws that hold the bracket and fan -then comes the hard part-the shaft screw is bolted through every bit of the guts then into the coupling. It is a lefthand thread. I ended up having to fabricate a piece of metal that slipped into the top of the coupling (in the teeth.) Then I secured the metal piece-it was just a twi inch piece of steel- in the vise, I held the blender and I got a big guy to attack the shaft bolt with a bunch of pressure and a straight screwdriver. It finally popped and I was able to unscrew the old coupling and replace it with the new. Reminds of when guys put on lug nuts and I have to try and get them off. But I saved at least $100.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tammy from New Bloomfield, PA
- Parts Used:
- WPW10500386
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Collar would not sit down on the blender base.
No installation required. The new collar came with the sealing ring, locking collar and blade assembly - everything needed in one piece. I just put it on the base and attached the pitcher.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from Lexington, KY
- Parts Used:
- WPW10524701
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The rubber blender foot was missing.
Inserted the replacement rubber blender foot in to the socket. Simply pushed it in. Fit snugly. Thanks for being one of the only places you can get a replacement rubber blender foot!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mychelle from new york, NY
- Parts Used:
- WPW10221782
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Glass jar to our kitchen Aid blender cracked on the bottom
I ordered a new jar from Parts Direct and it came fast and well wrapped, I washed it and used it ASAP! Thank you!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arleen from Chicago, IL
- Parts Used:
- WPW10686132, WPW10500387
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Air Conditioner Front Panel Became Damages
Easily done -- fit perfectly and looks great! I'm not a "handy" person and found this to be super simple and did the job!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Reginald from Sacramento, CA
- Parts Used:
- WPW10686132, WPW10500388
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old blade was not cutting
Very easy, the only issue was the time it took to receive the replacement part....!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Karl from Pelham, NH
- Parts Used:
- WPW10221782
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Jar broke
So sad when I forgot to take the spoon out of my nice new blender, causing it to break the jar! But, for a fair price and a few short days of waiting, Partselect sent me a new jar. The smoothies are pouring once again!
Was this instruction helpful to you?
Thank you for voting!