KSB5BK4 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Alberto from Amherst, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The drive coupling (what turns the blender) lost all teeths
Watched the video on the site on how to remove the old one and install the new one and it took me all of 5 minutes, at most. I almost threw it away. Super cheap repair. The product arrived in 2 days too. I am saving the site. They are great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Suresh from Louisville, KY
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
drive coupling broke
simple clear instructions to follow
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- prasad from cave junction, OR
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
worn drive coupling
Pry off the old, clean up drive threads, thread on the new one. easy as pie
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anacleto from West Newton, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
old drive coupling was worn out
I just followed the instructions to remove the old drive coupling and screwed in the new one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Andrew from Stony Brook, NY
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Drive coupling had broken teeth
Forget about the repair blogs. The coupling includes a repair instruction sheet. It actually took longer to read the sheet than it did to do the repair. Follow the repair sheet instructions. Very easy, however not intuitive.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- kathy from fox island, WA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The part broke and the blender wouldn't operate correctly. ctlly.
After I discovered that it needed to be screwed on turning to the left it was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Albemarle, NC
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
worn drive coupling
easier than i anticipated. i thought i would have to tear the unit down to get this part installed, but the replacement came with (even an idiot can do it)instructions, and it took all of four minutes. Mike in Albemarle,NC..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jennifer from College Station, TX
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The fingers where sheared off so the blade would not turn.
Pretty muched followed the directions, but after reading all the reviews I knew what do to before the part arrived. Super easy. My blender had been out of commission for a while...now I'm back in business. Well worth the $14 (part and shipping).
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mario from Virginia Beach, VA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
coupling's two extrusions broken
with a flat wrench grab the shaft and unscrew the coupling (note: left handed threads)... then install the replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Phoeniox, AZ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Teeth on rubber coupling were broken off.
Just like the directions said, I pryed up on the coupling at a few points around it's circumference and it became loose enough to unscrew. I didn't believe it was going to work at first but, amazingly, it did. All that was left to do was screw on the new part. No problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ernestine from Madison, ME
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
coupling had broken a couple of pieces off
Intructions were simple. Pried off the old coupling with the screwdriver and applied presser to replace the new one on the spindle.
Comment: KitchenAid appliances are made to last unlike most other small kitchen appliances. They are made of strong materials and repairable where as other similar products get thrown out when they break.
Comment: KitchenAid appliances are made to last unlike most other small kitchen appliances. They are made of strong materials and repairable where as other similar products get thrown out when they break.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Albert from Frenchtown, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Coupler broken
It was very easy to unscrew the coupler I used locktight to put on the new part. Thank you sending
the right part the first time
Albert
the right part the first time
Albert
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Athens, GA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cup drive on blender was stripped.
Released cup drive with screw driver and un-screwed, screwed on new driver.
That is all, works like a new blender.
That is all, works like a new blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- refugio from san francisco, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old coupling got broken
it was too easy, i only used my hand to screw the coupling to the blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maryann from Pawtucket, RI
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
So Easy
The coupling split apart on my Kitchenaid Blender. I ordered the coupling part and "Bingo", I was back in business. It took no time at all and one screwdriver. I saved penty of money by not having to buy a new appliance.
Was this instruction helpful to you?
Thank you for voting!