5KSB52SBU4 KitchenAid Blender - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Albert from Frenchtown, NJ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench set
Coupler broken
It was very easy to unscrew the coupler I used locktight to put on the new part. Thank you sending
the right part the first time
Albert
the right part the first time
Albert
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from Athens, GA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Cup drive on blender was stripped.
Released cup drive with screw driver and un-screwed, screwed on new driver.
That is all, works like a new blender.
That is all, works like a new blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alfaridys from Pt St Lucie, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers
coupling on blender dry rotted
simply hold the axel with the wire stripper to prevent from rotating. Using the pliers firmly turn old coupling counterclockwise until loose. Once this coupling is totally off you are ready to screw on the new one. Very simple. The most difficult part was finding a tool slim enough to fit between old coupling and base to hold axel from spinning. I ordered part on sunday and received it on tuesday. It spared me from throwing away a $120.00 dollar kitchenaide blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- refugio from san francisco, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
old coupling got broken
it was too easy, i only used my hand to screw the coupling to the blender.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Robert from Naples, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
blender coupler was worn down
Using the precise instructions provided by parts select, I used a big screw driver and pried off the old coupler and cleaned the area and screwed on the new coupler. Fixed!
The part finally arrived 3 weeks later, after being out of stock and back ordered a couple times.
The part finally arrived 3 weeks later, after being out of stock and back ordered a couple times.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maryann from Pawtucket, RI
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
So Easy
The coupling split apart on my Kitchenaid Blender. I ordered the coupling part and "Bingo", I was back in business. It took no time at all and one screwdriver. I saved penty of money by not having to buy a new appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mario from Virginia Beach, VA
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
coupling's two extrusions broken
with a flat wrench grab the shaft and unscrew the coupling (note: left handed threads)... then install the replacement part.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Phoeniox, AZ
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Teeth on rubber coupling were broken off.
Just like the directions said, I pryed up on the coupling at a few points around it's circumference and it became loose enough to unscrew. I didn't believe it was going to work at first but, amazingly, it did. All that was left to do was screw on the new part. No problem!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- prasad from cave junction, OR
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
worn drive coupling
Pry off the old, clean up drive threads, thread on the new one. easy as pie
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Polly from Southampton, MA
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Drive coupling wore out
It was harder than the directions said to get the old drive coupling off, but once the old was taken off, it was a piece of cake to put the new one on.
Thanks, great service from this website, received my part the next day after I ordered it!
Thanks, great service from this website, received my part the next day after I ordered it!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maureen from New Orleans, LA
- Parts Used:
- WP9704230
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers
The original drive coupling totally broke off in pieces.
Went to several online blog sites. Repair of the Kitchenaid blender is a hot topic. Could not repair it the way the instructions indicated. One person used a hammer and that did the trick! Who would have thought to use a hammer?!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Suresh from Louisville, KY
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
drive coupling broke
simple clear instructions to follow
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jack from Corona, CA
- Parts Used:
- WP9704230
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Rubber drive coupling on blender broke apart
Followed the instructions that came with the replacement drive coupler, first removeing the old part using a screw driver, and then easily screwed on the new part. Removing the old part without the aid of the instructions would have been problematic.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from West Palm Beach, FL
- Parts Used:
- WP9704230
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The drive wheel had worn teeth
The replacement part arrived so swiftly I didn't know what it was until I opened the packet.
The motor drive shaft has two flanges on it that can accept a narrow wrench and the drive wheel can be screwed off clockwise!
Alternatively the drive wheel can be easily prised off and the drive wheel screwed on anti-clockwise thread.
Success
Of course if the drive wheel was made of a more durable material this would not have been a problem unfortunately typically american not made to last!
The motor drive shaft has two flanges on it that can accept a narrow wrench and the drive wheel can be screwed off clockwise!
Alternatively the drive wheel can be easily prised off and the drive wheel screwed on anti-clockwise thread.
Success
Of course if the drive wheel was made of a more durable material this would not have been a problem unfortunately typically american not made to last!
Was this instruction helpful to you?
Thank you for voting!