Models > ACM244XL0 > Instructions

ACM244XL0 Whirlpool Air Conditioner - Instructions

Jump to:

All Instructions for the ACM244XL0
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
susan from Socorro, NM
Parts Used:
WPY015825
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Both motor clips broken - >40 year old dryer!!
Removed the back - Saw the broken clips on the base of the dryer (the wires to the motor were pulling out because the motor was slipping).

Guessed that the parts were motor clips (no pix in the web site!)

Got the parts in post - they were identical except needed some rubber grips inside to hold tight (Used pieces of bike tire inner tube cut to fit for this.) Attached clips. Works fine!!

(Son is an engineer - he found the problem. Husband is a retired doctor - he couldn't!! but together they
supplied the muscle)
Sue (67 years old)
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Susan J from Oneonta, NY
Parts Used:
WP8031121
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
no on/off knob
even I can replace a control knob....
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerold from Wichita, KS
Parts Used:
1185752
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Thermostat wouldnt cycle
pulled unit out far enough to take screws out of box holding thr thermostst and replaced it!
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ACM244XL0
1 - 3 of 3