Models > AGR05LHG1 > Instructions

AGR05LHG1 General Electric Air Conditioner - Instructions

Jump to:

All Instructions for the AGR05LHG1
1 - 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Riverwoods, IL
Parts Used:
WJ26X10209, WJ26X10208
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
on-off switch defective - stuck in on position
I removed the filter and then the two screws that held the outside cover of the air conditioner. I slid the cover off and pried the defective switch out of the panel. I exchanged the wires to the new switch and pushed the new switch into the panel with my fingers. I then replaced the cover and the air conditioner works fine.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the AGR05LHG1
1 - 1 of 1