All Installation Instructions for 5002

Customer:: paul from VADER, WA
Parts Used:: 692236, 272554S, 692253, 271866S
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set, Wrench set

replaced worn parts

took old off, put new on

11 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Rene from COVINGTON, LA
Parts Used:: 691751, 690822
Difficulty Level:: Really Easy
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Socket set, Wrench set

Stopped running. Turned to be a bent intake push rod and broken rocker arm

Removed head. Replaced both rocker arms, intake pus rod, push rod guide exhaust and head gaskets. Torqued head in 3 stages to 216 in/lbs. gapped intake to .004 and exhaust to .006 at TDC

Added oil and gas. Now running great

If you need to replace push rods use steel (exhaust) they are the same length
The engine was a Briggs & Stratton 217802 0113 E10604 (2006 year date code)
I used the following
796189 gasket
272475S gasket
697494 push rod
690822 push rod guide
691751 rocker arms

8 of 12 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: edward from GUYTON, GA
Parts Used:: 494504S, 271866S
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

engine with out oil connesting rod melted to crankshaft

took engine apart cleaned everything polished crank put rebuilt grease on metal parts changed connecting rod .assembled engine , lawnmower runs / very lucky

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

5002 - Instructions