Models > 128LD

128LD Husqvarna

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Models for 128LD

Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
This is a single fuel filter found in numerous types of lawn and garden equipment that have small engines. The fuel filter cleans the fuel before making its way to the carburetor, thus preventing buil...
In Stock
Order now and your part arrives by Apr 24
$15.54
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part ...
In Stock
Order now and your part arrives by Apr 24
Nut
$6.51
It is a genuine item that is supplied by the original equipment manufacturer for use with Craftsman chainsaws. This is the special nut that helps to secure the bar. It provides an identical replacemen...
In Stock
Order now and your part arrives by Apr 24
This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unf...
In Stock
Order now and your part arrives by Apr 24
This is a genuine Husqvarna replacement part, it is sold individually. The purpose of this filter is to keep dirt and other small particles from entering the carburetor and engine and causing internal...
In Stock
Order now and your part arrives by Apr 24
$10.89
This part includes one purge bulb, also known as a primer bulb. It is supplied by the manufacturer to be a direct replacement for the original. The purge bulb is pressed, and this removes the air from...
In Stock
Order now and your part arrives by Apr 24
This is an authentic replacement part manufactured for use with Craftsman chainsaws and a pole pruner. The adjustment screw kit is used to change the tension of the chain around the bar. This adjustme...
In Stock
Order now and your part arrives by Apr 24
This is an authentic replacement part manufactured for use with chain saws from Craftsman. This part helps adjust the tension on the bar, which loosens or tightens the chain. You may need a screw dri...
In Stock
Order now and your part arrives by Apr 24
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines. Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor. Work in a...
In Stock
Order now and your part arrives by Apr 24
This is an authentic OEM sourced replacement starter housing which is designed for use with Husqvarna lawn and garden equipment. It is the starter housing assembly which is used to pull-start the engi...
In Stock
Order now and your part arrives by Apr 24
This is a standard hardware which has multiple applications based on your tool. It is sourced from original equipment manufacturer for use with a variety of power equipment. Please refer to diagrams f...
In Stock
Order now and your part arrives by Apr 24
This replacement knob is used to secure the air filter cover. It is an authentic Husqvarna part sourced directly from original equipment manufacturer. It is commonly used on gas powered trimmers, edge...
In Stock
Order now and your part arrives by Apr 24

Common Problems and Symptoms for 128LD

Viewing 3 of 3
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
Fixing
How to fix it
Chain comes off guide bar
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from ENID, OK
Parts Used:
545008082
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
10 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from SALEM, OH
Parts Used:
530069599
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Broken fuel line
Removed broken fuel line from gas tank. Threaded new line into tank routed it to the carb and cut to length needed. Attached to the carb.
7 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from COLLEGEVILLE, PA
Parts Used:
530150552
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
I lost the oil cap for lubing blade
I ordered new one, it took a while to arrive and I found the diameter threads were wrong, seems like a simple part to replace, guess not
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!