Models
>
128LD
128LD Husqvarna Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 128LD
Viewing 3 of 3
Manuals & Guides for 128LD
Click to downloadKeep searches simple, eg. "belt" or "pump".
$4.99
This fuel filter is for lawn and garden equipment engines.
Fuel filter cleans the fuel before it reaches the carburetor.
Work in a well-ventilated area when installing this part. Drain the fuel...
In Stock
$7.46
The fuel line carries the fuel from the fuel tank into the carburetor. This particular fuel line can be used in various lawn and garden equipment, such as trimmers and blowers. This clear rubber part ...
In Stock
In Stock
In Stock
$7.46
This part includes one purge bulb, also known as a primer bulb. It is supplied by the manufacturer to be a direct replacement for the original. The purge bulb is pressed, and this removes the air from...
In Stock
In Stock
$46.07
This carburetor rebuild kit (part number 545081848) is for lawn and garden equipment engines.
Carburetor rebuild kit 545081848 includes gaskets and parts for rebuilding the carburetor.
Work in a...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Burney
March 23, 2023
Idles at full speed and stalls when you press the throttle. The unit is about 6 to 8 years old. Started this year. I use Stabil in all of my gas. I have cleaned the air filter and replaced the Champion spark plug with the same model.
For model number 128LD
Hello Burney, thank you for the question. If the spark arrestor is clogged, the engine may stall. To unclog the spark arrestor, remove it and clean it with a wire brush. If the spark arrestor, part number FIX9028907, is damaged, you may need to replace it. You may need to adjust your idle screws to fix the speed issue. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Robert
May 28, 2023
Trimmer acts like it's trying to lock up when pulling string
It won't allow you to pull wat can I do thanks
For model number 128LD
Hello Robert, thank you for the query. According to our research, you may need to check the starter pulley kit, part number FIX9982864, to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for 128LD
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Engine stops after a few seconds or minutes
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from ENID, OK
- Parts Used:
- 545008082
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
Unit was defective when bought
I ended up having to also replace the crankshaft bearing well as the cylinder kit. The owner thought the knocking was too much oil which led to a scori g of the cylinder when it needed crank bearing replaced. Sorry Huskvarna the first one wouldn't weedeat this was the second.
Was this instruction helpful to you?
Thank you for voting!