Nose Cone Assy. Conversion Kit N866410

This nose cone conversion kit is designed for your impact wrench and includes the front housing and a 1/2 inch hog ring anvil. These components are located at the front end of the impact wrench and enable you to attach various accessories and sockets to the tool. If you notice any damage, wear, or a loose grip on the accessories or sockets, it may indicate the need for a replacement. To remove these parts, refer to your user manual for specific instructions on disassembling the front housing. Typically, you will need to unscrew the mounting screws that secure the nose cone to the wrench body and then proceed to remove the fasteners on the anvil. It is important to note that this OEM kit does not include any additional hardware.