Maytag/Maytag_Thumb/OGHXSQCE.gif
See part 11 in the diagram
Replacing your Whirlpool Washer Suspension Spring Retainer play video
( Grid squares measure 1x1 inch )

Suspension Spring Retainer

$7.03
Fix Number: FIX11749057
Manufacturer #: WPW10145155
Manufactured by: Whirlpool

Product Description

This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring retainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.

Videos For installing this part.

Replacing your Suspension Spring Retainer

Replacing your Suspension Spring Retainer play video
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 1 reviews.
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    jerry from loveland, CO
  • Parts Used:
    WPW10145155, WP63907
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
tub bangs against frame or enclosure
1. remove two screws holding control panel, then swing up. 2.remove two flat spring keepers on case top, disconnect the door switch connector at back or top case. 2 tilt entire case foreward and remove. replace the three springs and clips at bottom of tub. I had to bend the clips a bit more with a hammer and vise to make them more hook shape where they fit into the frame. 4. reassemble everything in the reverse order. I unplugged the washer but left the water and drain connected.
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX11749057
Manufacturer Part Number: WPW10145155
Brand
Model Number
Description
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Kenmore
11015952401
Washer
Kenmore
11015954400
Washer