OEM Whirlpool Washer Pump Retainer [WP8546127] | Ships Today | Fix.com
Pump Retainer – Part Number: WP8546127
Pump Retainer – Part Number: WP8546127 Pump Retainer – Part Number: WP8546127 Pump Retainer – Part Number: WP8546127 https://fixcom.azureedge.net/Schematics/Maytag/G3DQDMEU.gif

Pump Retainer

Your Price
$5.59

Fix Number: FIX11746362

Manufacturer #: WP8546127

Manufactured by: Whirlpool

Part description

Sold Individually.

Works with the following brands

Whirlpool, Kenmore, KitchenAid, Roper, Maytag, Estate, Inglis, Crosley, Amana, Admiral, Magic Chef

Works with the following products

Washer, Washer Dryer Combo

Fixes the following symptoms

Leaking | Will not drain

Videos For installing this part.

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 2.9 / 5.0, 5 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jerry from Aransas Pass, TX
Parts Used:
WPW10074580, WPW10072840, 285753A, WP8546127, WP358237, WP3363394, 285871, 285811
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set
Agitator not working correctly and leaking from somewhere underneath.
I watched the videos before I ordered the part and when the order arrived I replaced the parts with no problems. The most time consuming part of the job was cleaning the washer. You will be surprised to find what will accumulate down there after years of service. The order came in in record time so this site gets an A+ for being fast and accurate. No back-orders either. I will surely use for any-other parts I need in the future.
12 of 12 people found this instruction helpful.
Were these instructions helpful?
Customer:
Michael from RIDGECREST, CA
Parts Used:
WP8546127, WP3363394
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers
I followed all instructio.
Followed all instructions but when it came.time to remove the pump it wouldn't come off as easy as the video, which I that was due to the rust. Once it was pried off i cleaned it good and found it would not slide on as easy either, I had to use a block of wood and a hammer to litely tap it onto the shaft so I should not crack the plastic housing. It took 4 hours to replace this item, 2 to get off priying it, 2 litely tapping it on..
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Josef from Oak Bluffs, MA
Parts Used:
WPW10074580, WP8546127, WP3363394, 285809
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
leaks water as soon as tub starts to fill
Tipped the machine on its side , undo the two hose clamps and two pump clips, then pull pump off motor drive. assemble reverse. very easy .. surprised at simplicity of such an expensive machime
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Holly from Mechanicsburg, PA
Parts Used:
WPW10250667, WP8546127, WP3363394
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
Pump leaked and needed replaced. Also replaced a rusted spring-unrelated to the pump.
Removed washer shell. Propped washer front on 10 in 2x4 stilts. Unclipped the two clamps that hold the pump. Attempted to remove pump. Unsuccessful. Loosened the clamps that hold the motor and removed the motor. Still unable to remove pump from motor because they are rusted together. Happened to have a spare motor. When the new parts came in the mail, I put the replacement motor in the same way the old one came out. In error, I had purchased only one rubeer grommet, so I reused the four old ones. Clamped tge motor in place, Attached the new pump, Reattached the hoses to the pump, Reconnected the electric to the motor, Took out the stilts, Replaced the shell, Reattached the panel, Plugged it in, And started it up. Ready to do two weeks worth of laundry....
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
stephen from fort ann, NY
Parts Used:
WP8546127, WP3363394
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers
heater doesn't fully heat
Had to unhook and move dryer out of way.Then unhook washer and move so I could tip it over onto its back.Removed retainers and pump, unhooked hoses.Installed new pump then put everything back place. Probably done in less than an hour.Biggest part of job was moving machines .
0 of 1 people found this instruction helpful.
Were these instructions helpful?

Model Cross Reference

This part works with the following models:

Fix Number: FIX11746362
Manufacturer Part Number: WP8546127
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Kenmore
11015952401
Washer
Kenmore
11015954400
Washer
Kenmore
11015954401
Washer
Kenmore
11015962400
Washer
Kenmore
11015962401
Washer
Kenmore
11015964400
Washer
Kenmore
11015964401
Washer
Kenmore
11016101690
Washer
Kenmore
11016101691
Washer