Jump to:
Product Description
This lid hinge pin is just over an inch long. It is all white in color and is made entirely of plastic. Sold individually.
-
Works with the following brands:Norge, Admiral, Maytag, Magic Chef
-
Works with the following products:Washer
-
Fixes the following symptoms:Lid or door won’t close, Will Not Start
-
Part# WP35-2045 replaces these:AP6008641, 35-2045
- Works with the following brands:
- Norge, Admiral, Maytag, Magic Chef
- Works with the following products
- Washer
- Fixes the following symptoms
- Lid or door won’t close, Will Not Start
- Part# WP35-2045 replaces these:
- AP6008641, 35-2045
Part Number Cross Reference
Videos For installing this part.
Replacing your Lid Hinge Pin

Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken lid hinge pin.
Removed lid and than removed the lid hinge pins. Installed both new lid hinge pins onto lid. Released clips on front of machine in order to raise top of washer. Removed both original lid hinges. Installed one new lid hinge and installed lid with other lid hinge set in place. Lined up second new lid hinge with hole and installed screw.
... Read more
Lowered top of washer over clips and the job was complete. Received the correct parts which made the job very easy. Perfect, works like new. Thanks for your great service.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Timothy from Woodhaven, MI
- Parts Used:
- WP35-2045, WP35-2044, WP21352320
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Socket set, Wrench (Adjustable)
Washer pump was broken, making loud continuous noise.
First, make the back of the washer accessable. Second, remove 4 screws holding the plate cover in left rear of washer. Third, use adjustable pliers to remove both hoses. Fourth, use a 10mm socket, and remove the three hold down screws at the base of the water pump. The belt tension will release automatically, when the pump is unbolted. F
... Read more
ifth, reverse same steps. Last, tip the washer forward, and place belt on the transmission pulley and the motor pulley. The motor itself is adjustable with spring tension, allowing you to move the motor itself, while placing the belt on the water pump pulley. When you allow the spring tension of the motor to spring back in place, your belt will be tight. Place water pump cover (access panel) back in place. Your washer is ready to be used.
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken plastic hinge pins
Pry open top section Remove hinge blocks and top don't drop screws remove pin blocks from lid .reinstall pin blocks on lid. slide hinge blocks on to lid assy and rescue whole unit back on to top section. Close the top section done
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge broken
Replaced both sides. Used a narrow stiff paint scraper to pop the top off. Pulled the washer out, tilted the top back, removed the the screws with the Six inch ratchet with two inch Phillip head driver. This is easier than a screw driver. More torque required on the hard to remove screws. I put the hinge and pins on, set in place to tight
... Read more
en the last two screws in place. Without screws being hard to remove, probably 20 minute job.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hinge pin broke on both sides of top. Replaced both the hinge and pin, very easy.
Popped up top to expose screws for hinges. Unscrewed old one, put new one in place. Done! It was that simple.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marvin M - May 21, 2021
Verified Purchase
Washing Machine Hinge Pin
Order was received on schedule and repair was made with no issues.
Model Compatibility
This part works with the following models:
Fix Number: FIX11741781
Manufacturer Part Number: WP35-2045
Manufacturer Part Number: WP35-2045
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.