Part Location Diagram of 12002773 Whirlpool Suspension Springs - Kit of 6
See part 18 in the diagram
Replacing your Maytag Washer Suspension Springs - Kit of 6
( Grid squares measure 1x1 inch )

Suspension Springs - Kit of 6 12002773

Rated by 4 customers 

?

Easy 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

?
$68.49
In Stock
Fix Number:
FIX2004049
Manufacturer #:
12002773
Manufactured by:
Whirlpool

Product Description

This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If your washer tub shakes, or moves around a lot during operation, it could mean that one or more of your springs are damaged or stretched. You will need to access the bottom of the tub for this repair by removing the front (and possibly the rear) panel. You will also need a pair of locking pliers to remove the old springs and reconnect the new ones. It is recommended to apply a small amount of grease to the bottom of the new springs before you reconnect them to the washer tub.

Videos For installing this part.

Replacing your Suspension Springs - Kit of 6

Replacing your Suspension Springs - Kit of 6

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

View More View Less
Drive Belt - 51 inches long
$10.97
In Stock
Snubber Ring
$13.09
In Stock
Suspension Spring Hook
$9.75
In Stock
Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.5 / 5.0, 4 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Jim from Minong, WI
Parts Used:
12002773, WP21002026
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
The washer was jumping all over during spin cycles
The most difficult thing to do was to install the springs. I removed the sides and back, which made it much easier. Otherwise, I followed the instructions which were provided by others on the site.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randy from Granite Falls, NC
Parts Used:
WPW10717210, WP21002026, 12002773
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Tub out of balance
Took springs off turn tube upside down undone screws and replaced snubber ring. Suspension springs put 3 on then used rolled up towel to hold tub tilted to side.Followed some. videoson how to fix it
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frank from Nampa, ID
Parts Used:
12002773
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
unbalanced loads
The repair was fairly straight forward. Unplug unit. Take putty knife and push in the clips at the top front and lift up the top. next take out 1 screw on each side top holding on the front. lift off front. Use gloves as the metal can be sharp. take vise grips or pliers and switch out the springs 1 or 2 maybe easier to get from the rear c heck panel.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert E from Downingtown, PA
Parts Used:
12002773
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Washer Machine shaking and out of balance
I follow the you tube video that was in the confirmation email when I ordered the parts. I dd everything except that I just loosen the bolts holding the brake assembly as I had bought the wrong size bolts. Carefully to only loosen them enough to replace the snubber ring. The only issue that I had was get ting the kit of 6 suspension springs instead of just one spring. I appreciate the fast shipment once you realized that there was an ordering problem and my repair has fixed the machine.Thanks
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX2004049
Manufacturer Part Number: 12002773
Brand
Model Number
Description
Admiral
AAV1100AWW
Washer - Residential
Admiral
AAV1200AGW
Washer - Residential
Admiral
AAV1200AJW
Washer - Residential
Admiral
AAV1200AKW
Washer - Residential
Admiral
AAV2200AGW
Washer - Residential
Admiral
AAV2200AJW
Washer - Residential
Admiral
AAV4000AWW
Washer - Residential
Admiral
AAV4200AGW
Washer - Residential
Admiral
AAV7000AWW
Washer - Residential
Admiral
AAV8000AGW
Washer
Admiral
AAV8000AJW
Washer
Admiral
AAV8000AKW
Washer
Admiral
AAV8000AWW
Washer - Residential
Admiral
AAV8005EWW
Washer - Residential
Admiral
AAV9000AGW
Washer
Admiral
AAV9000AWW
Washer - Residential
Amana
ALW221RJW
Washer - Residential
Magic Chef
CAV1000AWW
Washer - Residential
Magic Chef
CAV1004AWW
Washer
Magic Chef
CAV2000AGW
Washer - Residential
Magic Chef
CAV2000AJW
Washer - Residential
Magic Chef
CAV2000AKW
Washer - Residential
Magic Chef
CAV2000AWQ
Washer - Residential
Magic Chef
CAV2000AWW
Washer - Residential
Magic Chef
CAV2004AJW
Washer - Residential
Magic Chef
CAV2004AKW
Washer - Residential
Magic Chef
CAV2004AWW
Washer - Residential
Magic Chef
CAV2005AWW
Washer - Residential
Magic Chef
CAV4000AWW
Washer - Residential
Magic Chef
CAV4004AGW
Washer - Residential