Part Location Diagram of WPW10111389 Whirlpool Washer Timer
See part 7 in the diagram
( Grid squares measure 1x1 inch )

Washer Timer WPW10111389

Rated by 1 customers 

?

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

?
$172.27
In Stock
Fix Number:
FIX11748352
Manufacturer #:
WPW10111389
Manufactured by:
Whirlpool

Product Description

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Lawrence from Temeculas, CA
Parts Used:
WPW10111389
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Timer malfunction - wash cycle extended to 2 hours
I used a flat tip screw driver to remove the cover plate on the timer knob (be gentile as there are 4 flat plastic mounts that can easily break off (I broke 1). I used a radiator hose tool to depress in the center of the knob to release the 2 plastic hooks to pull the knob off. I used the radiator hose tool to gently remove the back kno b plate (chrome). I used the putty knife to depress the clips on each side of the control panel (bottom front each side) and the control panel easily popped up. I rotated back to reveal back of all control modules. I used the radiator hose tool to easily depress the electrical connector clips to easily pull out the 2 wiring harness plugs. I then used the radiator hose tool to get behind and depress the stationary snap brace so I could easily slide the entire timer mechanism to the right so as to remove it. I then attached the new timer and slid to the left until the stationary snap clipped into place. I then connected both wiring harnesses. I then cleaned under the control panel w/cleaner and brillow pad as it was dirty. I then aligned the control panel so the rear bottom plastic hooks fit in the top and then rotated down and forward so the 2 metal clips clicked into place and the control panel was attached. I then cleaned the chrome back knob and attached paying close attention to the key. I then snapped the main control knob on so the 2 plastic hooks clicked into place and finally, I depressed the cover plat on the control knob aligning the 3 unbroken flat plastic mounts and I was finished in less than 15 minutes. Very easy job.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11748352
Manufacturer Part Number: WPW10111389
Brand Model Number Description
Maytag 7MMPD6634TQ0 Washer - Residential
Maytag 7MMPD6845TM0 Washer - Residential
Maytag 7MMPL6000TW0 Washer - Residential
Maytag 7MMSL0100TW0 Washer - Residential
Maytag 7MMSL6955TW0 Washer - Residential
Maytag 7MMSL7959TW0 Washer - Residential
Maytag 7MMSL7959TW1 Washer - Residential
Maytag MTW5600TQ0 Washer - Residential
Maytag MTW5600TQ1 Washer - Residential
Maytag MTW5600TQ2 Washer - Residential
Maytag MTW5605TQ0 Washer - Residential
Maytag MTW5605TQ1 Washer - Residential
Maytag MTW5620TQ0 Washer - Residential
Maytag MTW5620TQ1 Washer - Residential
Maytag MTW5620TQ2 Washer - Residential
Maytag MTW5621TQ0 Washer - Residential
Maytag MTW5621TQ1 Washer - Residential
Maytag MTW5630TQ0 Washer - Residential
Maytag MTW5630TQ1 Washer - Residential
Maytag MTW5640TQ0 Washer - Residential
Maytag MTW5640TQ1 Washer - Residential
Maytag MTW5640TQ2 Washer - Residential
Maytag MTW5670TQ0 Washer - Residential
Maytag MTW5700TQ0 Washer - Residential
Maytag MTW5707TQ0 Washer - Residential
Maytag MTW5720TQ0 Washer - Residential
Maytag MTW5721TQ0 Washer - Residential
Maytag MTW5730TQ0 Washer - Residential
Maytag MTW5740TQ0 Washer - Residential
Maytag MTW5770TQ0 Washer - Residential