Injector Sleeve Bracket - Side Mounting WP22213057
$9.92
In Stock
- Fix Number:
- FIX11739774
- Manufacturer #:
- WP22213057
- Manufactured by:
- Whirlpool
Jump to:
Product Description
This injector sleeve bracket is white and made entirely of plastic. This is a side mounting style bracket.
-
Works with the following brands:Maytag, Jenn-Air
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Leaking
-
Part# WP22213057 replaces these:AP6006698, 2-13057, 213057, 22213057
- Works with the following brands:
- Maytag, Jenn-Air
- Works with the following products
- Washer, Washer Dryer Combo
- Fixes the following symptoms
- Leaking
- Part# WP22213057 replaces these:
- AP6006698, 2-13057, 213057, 22213057
Part Number Cross Reference
Videos For installing this part.
Replacing your Injector Sleeve Bracket - Side Mounting
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Autographic Wedding and from Norwood, MA
- Parts Used:
- WP22213057, WP216201, 205613
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set
This stackable washer dryer started to leak water on the floor
Well finding information on the problem and getting the parts was not the problem, the problem was that the water valve and Rubber injector Valve were just under the lid of the washing machine, which was just underneath the dryer which had to be removed to remove the washer lid. This was the challenge. But once I figured out that 4 bolt
... Read more
s, 2 on each side in the back held the dryer in place over the washer, it was simply a matter of picking the dryer up and setting it on the floor. Then replacing it when the repair was done. If you have help, this will not be such a big deal. I am 62 and had no one around at the time. The repair itself was easy and well outlined on this site webpage and others. There is one nut in each corner that holds the top on. Remove the front panel's two screws at the bottom and you will have access.Your going to pull the two hex nuts off the back plate that holds the connectors for the hot and cold water hoses. That is the Water Inlet Valve. Pull it through and up so you can remove the two hoses, and then unplug the upper and lower wire connectors. I marked them so I would remember but probably not necessary. I also elected to change the injector valve and injector sleeve bracket, for less then 10 bucks I did not want to be back at this thing in a few months. After you get the new parts on, push the water valve back to the rear and re attach the mounting plate, then nut that plate back to the rear of the washer. Then its just a matter of getting the dryer back on top. Take the opportunity to clean all the dust out of both parts to avoid any risk of fire. Been up and running a couple weeks now and no more issues. Less than $50 fix much better than spending another 1200 on new washer dryer.
Read less
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11739774
Manufacturer Part Number: WP22213057
Manufacturer Part Number: WP22213057
| Brand | Model Number | Description |
|---|---|---|
| Maytag | A104 | Washer - Top Loading |
| Maytag | A106 | Washer - Top Loading |
| Maytag | A106S | Washer - Residential |
| Maytag | A107 | Washer - Top Loading |
| Maytag | A107S | Washer - Residential |
| Maytag | A108 | Washer - Top Loading |
| Maytag | A108S | Washer - Residential |
| Maytag | A110 | Washer - Top Loading |
| Maytag | A112 | Washer - Top Loading |
| Maytag | A15CA | Washer |
| Maytag | A15CM | Washer |
| Maytag | A15CT | Washer |
| Maytag | A16CA | Washer |
| Maytag | A16CM | Washer |
| Maytag | A16CT | Washer |
| Maytag | A17CA | Washer |
| Maytag | A17CM | Washer |
| Maytag | A17CT | Washer |
| Maytag | A180 | Washer - Top Loading |
| Maytag | A181 | Washer - Top Loading |
| Maytag | A182 | Washer - Top Loading |
| Maytag | A183 | Washer - Top Loading |
| Maytag | A18CA | Washer |
| Maytag | A18CM | Washer |
| Maytag | A18CT | Washer |
| Maytag | A190 | Washer - Top Loading |
| Maytag | A206 | Washer - Top Loading |
| Maytag | A206S | Washer - Top Loading |
| Maytag | A207 | Washer - Top Loading |
| Maytag | A207S | Washer - Top Loading |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.