See part 22 in the diagram
( Grid squares measure 1x1 inch )
Lower Fill Injector
$46.72
In Stock
Fix Number: FIX11739270
Manufacturer #: WP22001186
Manufactured by:
Whirlpool
-
Product Description
This lower fill injector is just over five inches long. It is white, made of plastic and is used on some washing machines.
-
Works with the following brandsMaytag, International, Jenn-Air
-
Works with the following productsWasher, Washer Dryer Combo
-
Fixes the following symptomsLeaking
-
Part Number Cross ReferencePart# WP22001186 replaces these:AP6006204, 22001186
Product Description
This lower fill injector is just over five inches long. It is white, made of plastic and is used on some washing machines.
-
Works with the following brands:Maytag, International, Jenn-Air
-
Works with the following products:Washer, Washer Dryer Combo
-
Fixes the following symptoms:Leaking
-
Part# WP22001186 replaces these:AP6006204, 22001186
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Margaret from Brewster, NY
-
Parts Used:WP22001186
-
Difficulty Level:Very Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers, Socket set
The lower fill injector broke and shook loose from the upper fill injector during spin cycle
1. Disconnect from outlet 2. Remove screws from bottom of front panel 3. Lift panel up and toward you to remove. Set aside 4. Remove 4 screws from instrument panel at top rear of washer and fold front down....be careful not to snag wires. 5. Remove 1 bolt which holds fill injector assembly to washer. Remove two screws from under top front of washer (formerly covered by the front panel in step 2) 6. Lift top of washer. 7. Remove broken lower fill injector from upper fill injector. 8. Install new lower fill injector 9. Reverse instructions to put everything back together.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11739270
Manufacturer Part Number: WP22001186
Manufacturer Part Number: WP22001186
Brand
Model Number
Description