Maytag/Maytag_Thumb/37308.gif
See part 10 in the diagram
( Grid squares measure 1x1 inch )

Rubber Injector Valve

★★★★★
★★★★★
1 Review
$ 19.22   In Stock
Fix Number: FIX11738945
Manufacturer #: WP216201
Manufactured by: Whirlpool

Product Description

This part is commonly known to cause a leak at the top left corner of the outer tub. It fits over the injector nozzle.

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.1 / 5.0, 8 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Rick from Nordland, WA
    • Parts Used:
      WP216201
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers, Socket set
    Water leaking from near the top of the washer.
    Removed the front panel by removing 2 screws near the bottom of the panel, Then removed 2 bolts holding the top panel and lifted the top panel/cover. I turned on the washer to find the source of the leak. Loosened the clamp and Removed the rubber injector valve which had a hole, causing the leak. After receiving the new part, I Inserted the new rubber injector valve, re-attached the hose, and tightened the clamp around the hose and the injector valve. Turned on the washer to check to verify that the leak was fixed, and then closed the top cover, re-inserted the bolts. Then I re-attached the front cover with its 2 screws.
    4 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Albert from Unadilla, NY
    • Parts Used:
      WP216201, WP213015, WP596669
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    noticed water was leaking in front of washer-right before we were leaving for vacation
    Upon returning from vacation, we needed to do laundry-so I put some plastic under the washer and we did a load. The water was leaking from the seam between the lid and the back panel on the side with the hot and cold water connections- not the front. I removed two screws from the front bottom panel and two screws from the underside of the lid.Turning the washer on showed the leak was coming from the injection valve( it was brittle from age). The rubber injection valve was replaced and installed( using a little liquid soap to help the rubber hose to slip over the rubber injection valve) with a new clamp. The leak was fixed.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Autographic Wedding and from Norwood, MA
    • Parts Used:
      WP22213057, WP216201, 205613
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Nutdriver, Pliers, Screw drivers, Socket set
    This stackable washer dryer started to leak water on the floor
    Well finding information on the problem and getting the parts was not the problem, the problem was that the water valve and Rubber injector Valve were just under the lid of the washing machine, which was just underneath the dryer which had to be removed to remove the washer lid. This was the challenge. But once I figured out that 4 bolts, 2 on each side in the back held the dryer in place over the washer, it was simply a matter of picking the dryer up and setting it on the floor. Then replacing it when the repair was done. If you have help, this will not be such a big deal. I am 62 and had no one around at the time. The repair itself was easy and well outlined on this site webpage and others. There is one nut in each corner that holds the top on. Remove the front panel's two screws at the bottom and you will have access.Your going to pull the two hex nuts off the back plate that holds the connectors for the hot and cold water hoses. That is the Water Inlet Valve. Pull it through and up so you can remove the two hoses, and then unplug the upper and lower wire connectors. I marked them so I would remember but probably not necessary. I also elected to change the injector valve and injector sleeve bracket, for less then 10 bucks I did not want to be back at this thing in a few months. After you get the new parts on, push the water valve back to the rear and re attach the mounting plate, then nut that plate back to the rear of the washer. Then its just a matter of getting the dryer back on top. Take the opportunity to clean all the dust out of both parts to avoid any risk of fire. Been up and running a couple weeks now and no more issues. Less than $50 fix much better than spending another 1200 on new washer dryer.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Burr from GREELEY, CO
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers, Socket set
    rubber water injector valve had failed and was leaking water.
    Viewed the You Tube video, which was excellent.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      susan from milwaukee, WI
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Socket set
    washer leaked from the bottom when FILLING
    The U-Tube video from this site was great. SHOULD have taken a half-hour-- tops-- but the most difficult part was freeing up one of the screws at the bottom of the front panel. Finally had to drill it out. AFTER COMPLETING THE ACTUAL REPAIR, the leaking problem was solved.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      heinz from amherst, NY
    • Parts Used:
      WP216201, WP213015, 206154
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers
    water leak far left corner
    removed front panel via two screws near bottom, then lift top to expose water injecter hose. I pulled control knob to activate water fill to verify were it was leaking. Once replaced,I reactivated water fill to verify no leaks.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Crawford from Lancaster, SC
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Socket set
    The Inlet Valve was leaking every time the washer would fill to start washing. The water would run out the side near the top.
    I removed the front cover and disconnected the bleach filler tube from the top cover. I removed the two screws that held the top cover on and tilted the top cover back. I located the injector valve and determined that it was bad by starting the washer while watching the valve run over into the floor. I loosened the first clamp on the injector valve and slipped the injector valve and plastic nozzle out. I slid the new plastic injector nozzle into the new rubber injector valve. I rubbed a little grease around the rim of the injector valve so it would slide back into the hose easily into place. I reconnected the hose clamp and started the washer. No more water leak. I connected the bleach filler tube and put the covers back on. I put the washer back into it's place and started washing clothes. Its been two weeks and I haven't seen any water in the floor. This includes about six loads of clothes.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      janetjean from fairbury, NE
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    leaking
    Looked it up on your site , watched the video, odered the part and put it on. Seems to have been the problem because it is not leaking now . Thank You for your prompt service
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating: (1 Review)
      5.0
      ★★★★★
      ★★★★★
      Filter By Rating:
      • 5
        1
      • 4
        0
      • 3
        0
      • 2
        0
      • 1
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Compatibility
          This part works with the following models:
          Fix Number: FIX11738945
          Manufacturer Part Number: WP216201
          Brand
          Model Number
          Description
          Maytag
          A104
          Washer - Top Loading
          Maytag
          A105
          Washer - Top Loading
          Maytag
          A106
          Washer - Top Loading
          Maytag
          A106S
          Washer - Residential
          Maytag
          A107
          Washer - Top Loading
          Maytag
          A107S
          Washer - Residential
          Maytag
          A108
          Washer - Top Loading
          Maytag
          A108S
          Washer - Residential
          Maytag
          A110
          Washer - Top Loading
          Maytag
          A112
          Washer - Top Loading
          Maytag
          A15CA
          Washer
          Maytag
          A15CM
          Washer
          Maytag
          A15CT
          Washer
          Maytag
          A16CA
          Washer
          Maytag
          A16CM
          Washer
          Maytag
          A16CT
          Washer
          Maytag
          A17CA
          Washer
          Maytag
          A17CM
          Washer
          Maytag
          A17CT
          Washer
          Maytag
          A180
          Washer - Top Loading
          Maytag
          A181
          Washer - Top Loading
          Maytag
          A182
          Washer - Top Loading
          Maytag
          A183
          Washer - Top Loading
          Maytag
          A18CA
          Washer
          Maytag
          A18CM
          Washer
          Maytag
          A18CT
          Washer
          Maytag
          A190
          Washer - Top Loading
          Maytag
          A1910
          Washer - Top Loading
          Maytag
          A206
          Washer - Top Loading
          Maytag
          A206S
          Washer - Top Loading