Maytag/Maytag_Thumb/37308.gif
See part 9 in the diagram
( Grid squares measure 1x1 inch )

Plastic Injector Nozzle

$ 7.09   In Stock
Fix Number: FIX11738878
Manufacturer #: WP213015
Manufactured by: Whirlpool

Product Description

This injector nozzle is just under three inches long. It is white in color and made entirely of plastic.

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 6 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      Albert from Unadilla, NY
    • Parts Used:
      WP216201, WP213015, WP596669
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    noticed water was leaking in front of washer-right before we were leaving for vacation
    Upon returning from vacation, we needed to do laundry-so I put some plastic under the washer and we did a load. The water was leaking from the seam between the lid and the back panel on the side with the hot and cold water connections- not the front. I removed two screws from the front bottom panel and two screws from the underside of the lid.Turning the washer on showed the leak was coming from the injection valve( it was brittle from age). The rubber injection valve was replaced and installed( using a little liquid soap to help the rubber hose to slip over the rubber injection valve) with a new clamp. The leak was fixed.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Burr from GREELEY, CO
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers, Socket set
    rubber water injector valve had failed and was leaking water.
    Viewed the You Tube video, which was excellent.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      susan from milwaukee, WI
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Nutdriver, Socket set
    washer leaked from the bottom when FILLING
    The U-Tube video from this site was great. SHOULD have taken a half-hour-- tops-- but the most difficult part was freeing up one of the screws at the bottom of the front panel. Finally had to drill it out. AFTER COMPLETING THE ACTUAL REPAIR, the leaking problem was solved.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      heinz from amherst, NY
    • Parts Used:
      WP216201, WP213015, 206154
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers
    water leak far left corner
    removed front panel via two screws near bottom, then lift top to expose water injecter hose. I pulled control knob to activate water fill to verify were it was leaking. Once replaced,I reactivated water fill to verify no leaks.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Crawford from Lancaster, SC
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers, Socket set
    The Inlet Valve was leaking every time the washer would fill to start washing. The water would run out the side near the top.
    I removed the front cover and disconnected the bleach filler tube from the top cover. I removed the two screws that held the top cover on and tilted the top cover back. I located the injector valve and determined that it was bad by starting the washer while watching the valve run over into the floor. I loosened the first clamp on the injector valve and slipped the injector valve and plastic nozzle out. I slid the new plastic injector nozzle into the new rubber injector valve. I rubbed a little grease around the rim of the injector valve so it would slide back into the hose easily into place. I reconnected the hose clamp and started the washer. No more water leak. I connected the bleach filler tube and put the covers back on. I put the washer back into it's place and started washing clothes. Its been two weeks and I haven't seen any water in the floor. This includes about six loads of clothes.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      janetjean from fairbury, NE
    • Parts Used:
      WP216201, WP213015
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Pliers, Screw drivers
    leaking
    Looked it up on your site , watched the video, odered the part and put it on. Seems to have been the problem because it is not leaking now . Thank You for your prompt service
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX11738878
      Manufacturer Part Number: WP213015
      Brand
      Model Number
      Description
      Maytag
      A104
      Washer - Top Loading
      Maytag
      A105
      Washer - Top Loading
      Maytag
      A106
      Washer - Top Loading
      Maytag
      A106S
      Washer - Residential
      Maytag
      A107
      Washer - Top Loading
      Maytag
      A107S
      Washer - Residential
      Maytag
      A108
      Washer - Top Loading
      Maytag
      A108S
      Washer - Residential
      Maytag
      A110
      Washer - Top Loading
      Maytag
      A112
      Washer - Top Loading
      Maytag
      A15CA
      Washer
      Maytag
      A15CM
      Washer
      Maytag
      A15CT
      Washer
      Maytag
      A16CA
      Washer
      Maytag
      A16CM
      Washer
      Maytag
      A16CT
      Washer
      Maytag
      A17CA
      Washer
      Maytag
      A17CM
      Washer
      Maytag
      A17CT
      Washer
      Maytag
      A180
      Washer - Top Loading
      Maytag
      A181
      Washer - Top Loading
      Maytag
      A182
      Washer - Top Loading
      Maytag
      A183
      Washer - Top Loading
      Maytag
      A18CA
      Washer
      Maytag
      A18CM
      Washer
      Maytag
      A18CT
      Washer
      Maytag
      A190
      Washer - Top Loading
      Maytag
      A1910
      Washer - Top Loading
      Maytag
      A206
      Washer - Top Loading
      Maytag
      A206S
      Washer - Top Loading