Drain Pump Kit 280187
$160.34
In Stock
- Fix Number:
- FIX1485610
- Manufacturer #:
- 280187
- Manufactured by:
- Whirlpool
Jump to:
Product Description
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
-
Works with the following brands:Kenmore, Whirlpool, Maytag, KitchenAid
-
Works with the following products:Washer
-
Fixes the following symptoms:Will not drain, Leaking, Draining Issues
-
Part# 280187 replaces these:AP3953640, 1200164, 280187, 280187, 280187VP, 285998 ... Show more , 8181684, 8182819, 8182821 Show less
- Works with the following brands:
- Kenmore, Whirlpool, Maytag, KitchenAid
- Works with the following products
- Washer
- Fixes the following symptoms
- Will not drain, Leaking, Draining Issues
- Part# 280187 replaces these:
- AP3953640, 1200164, 280187, 280187, 280187VP, 285998, 8181684, 8182819, 8182821
Part Number Cross Reference
Videos For installing this part.
Replacing your Drain Pump Kit

Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Reggie from Annapolis, MD
- Parts Used:
- 280187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Water not draining. Machine was showing F2
Unplugged machine disconnected wire harness and drain pump connection. Switched out drain pump and connected everything back together.
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Julie from St. James, MN
- Parts Used:
- 280187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Washer would stop and flash Fo2 code indicating drain promblem,
Replaced drain pump with a universal kit and we are pleased to report washer is running perfect.
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeanne from North Fork, CA
- Parts Used:
- 280187
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Tub did not drain or spin.
We watched the excellent video and my husband put the new water pump kit in. It worked perfectly. We couldn't be happier as it would have cost a whole lot more to have a repair man come the distance to our house.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Rock Hill, SC
- Parts Used:
- 280187
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Pump was not moving water from drum to discharge line.
I had previously taken the old pump and filter out while waiting for new part to arrive. Installed in about 10 minutes. Piece of cake/just a walk in the park to replace.
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Anacoco, LA
- Parts Used:
- 280187
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Socket set
major difficulty putting the drain hose from the loader onto the pump. The clamp is a beast to sqeeze together while maneuvering it iver the hose and pump inlet shaft
The new pump had grommets on them already even tho they give you new ones. I unscrewed the front screw of the pump from the chassis and put a towel under the hoses carefully. I then disconnected the hose clamps from the pump. It is real easy. In reverse order you start with the drain hose which was difficult, followed by the return drain
... Read more
hose(easy installation), followed by inserting the pump into the grommet holes and screwing the pump to chassis.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lonny from Ashland, OR
- Parts Used:
- 280187
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
water in washer
replaced drain pump,very easy and accessible when front panel removed with three tork screws.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Olmsted Falls, OH
- Parts Used:
- 280187
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Drain pump failed
As noted elsewhere, the hardest part was removing the two hose spring clamps and reinstalling the hose spring clamps. It was easier to access the spring clamps by first unmounting the pump so that it could be turned to make the clamps more accessible. I did not re-install the spring clamps but rather used stainless steel screw-type clam
... Read more
ps from an auto parts store. The best tip I read and used was to use a wet/dry shop vac to suck out all the water by attaching it to the discharge tube where it drains into the laundry tub. Lastly, I did not need to modify the wire connector on the new pump.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1485610
Manufacturer Part Number: 280187
Manufacturer Part Number: 280187
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.