Drain Pump Kit
$160.49
In Stock
Fix Number: FIX1485610
Manufacturer #: 280187
Manufactured by:
Whirlpool
-
Product Description
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
-
Works with the following brandsKenmore, Whirlpool, Maytag, KitchenAid
-
Works with the following productsWasher
-
Fixes the following symptomsWill not drain, Leaking, Draining Issues
-
Part Number Cross ReferencePart# 280187 replaces these:AP3953640, 1200164, 280187, 280187, 285998, 8181684, 8182819, 8182821
Product Description
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
-
Works with the following brands:Kenmore, Whirlpool, Maytag, KitchenAid
-
Works with the following products:Washer
-
Fixes the following symptoms:Will not drain, Leaking, Draining Issues
-
Part# 280187 replaces these:AP3953640, 1200164, 280187, 280187, 285998, 8181684 ... Show more , 8182819, 8182821 Show less
Videos For installing this part.
Replacing your Drain Pump Kit
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Reggie from Annapolis, MD
-
Parts Used:280187
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Water not draining. Machine was showing F2
Unplugged machine disconnected wire harness and drain pump connection. Switched out drain pump and connected everything back together.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Julie from St. James, MN
-
Parts Used:280187
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Washer would stop and flash Fo2 code indicating drain promblem,
Replaced drain pump with a universal kit and we are pleased to report washer is running perfect.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Jeanne from North Fork, CA
-
Parts Used:280187
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Tub did not drain or spin.
We watched the excellent video and my husband put the new water pump kit in. It worked perfectly. We couldn't be happier as it would have cost a whole lot more to have a repair man come the distance to our house.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:David from Rock Hill, SC
-
Parts Used:280187
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
Pump was not moving water from drum to discharge line.
I had previously taken the old pump and filter out while waiting for new part to arrive. Installed in about 10 minutes. Piece of cake/just a walk in the park to replace.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Thomas from Anacoco, LA
-
Parts Used:280187
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Socket set
major difficulty putting the drain hose from the loader onto the pump. The clamp is a beast to sqeeze together while maneuvering it iver the hose and pump inlet shaft
The new pump had grommets on them already even tho they give you new ones. I unscrewed the front screw of the pump from the chassis and put a towel under the hoses carefully. I then disconnected the hose clamps from the pump. It is real easy. In reverse order you start with the drain hose which was difficult, followed by the return drain hose(easy installation), followed by inserting the pump into the grommet holes and screwing the pump to chassis.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Lonny from Ashland, OR
-
Parts Used:280187
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
water in washer
replaced drain pump,very easy and accessible when front panel removed with three tork screws.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Scott from Olmsted Falls, OH
-
Parts Used:280187
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
Drain pump failed
As noted elsewhere, the hardest part was removing the two hose spring clamps and reinstalling the hose spring clamps. It was easier to access the spring clamps by first unmounting the pump so that it could be turned to make the clamps more accessible. I did not re-install the spring clamps but rather used stainless steel screw-type clamps from an auto parts store. The best tip I read and used was to use a wet/dry shop vac to suck out all the water by attaching it to the discharge tube where it drains into the laundry tub. Lastly, I did not need to modify the wire connector on the new pump.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX1485610
Manufacturer Part Number: 280187
Manufacturer Part Number: 280187
Brand
Model Number
Description