This is a replacement lid hinge for your washer. It is approximately 2.5 inches in length and 1.5 inches in width. The lid hinge is what the lid for your washer pivots on. If the lid hinge is damaged, the washer lid may not open or close properly. The lid hinge is screwed into the washer lid. You will need a Phillips-head screwdriver to detach it. There will be a lid hinge on either side of the lid, so be sure to determine if you need to replace both hinges, or only one.
Works with the following brands:
Kenmore, Maytag, Whirlpool, Crosley
Works with the following products:
Washer
Fixes the following symptoms:
Lid or door won’t close
Part# WP8563964 replaces these:
AP6004844, 8563964
Works with the following brands:
Kenmore, Maytag, Whirlpool, Crosley
Works with the following products
Washer
Fixes the following symptoms
Lid or door won’t close
Part Number Cross Reference
Part# WP8563964 replaces these:
AP6004844, 8563964
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Farrell
February 12, 2024
could you demonstrate how to simply change the lid on this model? My lid is rusty and I would like to replace it,.. also do you sell the replacement lid for this model? Thanks!
For model number WTW7040DW1
Hello Farrell, thank you for your question. The Lid is PS12070870. Lift the lid and remove 2 screws on hinges on both sides with a Phillips Screw driver. Take your flat head screw driver and slide in behind the left hinge at the lowest area and pull out gently. Then hold the lid and pull to the left so the lid is freed. Remove the Right hand hinge pin and you are ready for the new lid. Take the right hand hinge and screw in back in to the new lid. Insert the pin (and the lid) on the right and with the lid in place, reattach the left hand hinge. Good luck with your repair.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cleaning the tub, pump...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe and designed to clea...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
This nickel-safe, unscented ice machine cleaner measures 16 fluid ounces and is used to remove mineral build-up and hard water and is compatible with several makes and models of freestanding ice machines. To use properly...
View Less
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 5.0 / 5.0, 1 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The 2 screws holding the broken hinge were removed. The area around the hinge was cleaned with Scrubbing Bubbles. The new hinge pin was inserted though the hole in the washer top door into the female receptor in the body of the machine, and the two screws were reinserted into the washer top to complete the job. EASY!
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11746532
Manufacturer Part Number: WP8563964
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.