Jump to:
Product Description
If your washer isn’t filling right or leaking from the back, this dual water valve could be the fix. It controls hot and cold water flow and fits many Whirlpool, Maytag, and KitchenAid models. Easy to install—just unplug the washer and turn off the water first. Sold individually.
-
Works with the following brands:Kenmore, Whirlpool, Maytag, Amana
-
Works with the following products:Washer
-
Fixes the following symptoms:Leaking, Water Filling Issues, No hot or cold water
-
Part# WP8182862 replaces these:AP6011851, 8182862, WP8182862VP
- Works with the following brands:
- Kenmore, Whirlpool, Maytag, Amana
- Works with the following products
- Washer
- Fixes the following symptoms
- Leaking, Water Filling Issues, No hot or cold water
- Part# WP8182862 replaces these:
- AP6011851, 8182862, WP8182862VP
Part Number Cross Reference
Videos For installing this part.
Replacing your Washer Water Inlet Valve
Questions and Answers
Be the first to ask our experts a question about this part!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Robert from Austin, TX
- Parts Used:
- WP8182862
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
the tub would have water in it after it sat for a day
Removed the top after removing three screws at the back. The water valve had one star driver screw to remove and one hose clamp. I had to elongate the screw hole that the star driver screw went through. It was a very easy repair.
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Louisville, KY
- Parts Used:
- WPW10110225, WP8182862
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Getting an intermittant "HF" error code on display.
Replaced the water intake valve. 1) Removed the top panel of the washer (screws) which allowed access to the valve assembly. 2) Another screw removed the valve from the washer's side. 3) A spring clamp held the water hose to the valve, and that was removed with pliers.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dan from Reidsville, NC
- Parts Used:
- WP8182862
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Pliers, Screw drivers
Cold water would not cut off
Checked line for trash. Removed lid to washer. 3 screws along the back edge holds it on. Blew thru lines with compressed air. Water still running. Ordered water inlet valve . Removed 1 screw , disconnected wires and water lines with clamp and replaced with new valve. Washed 4 loads the next morning.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Denise from Mount Dora, FL
- Parts Used:
- WP8182862
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Standing water in Duet front loader
Went to www.youtube.com and found a video on how to replace the water inlet valve for my washer. Very easy.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Harry W - November 26, 2020
Verified Purchase
Works great
The right part
Model Compatibility
This part works with the following models:
Fix Number: FIX11745050
Manufacturer Part Number: WP8182862
Manufacturer Part Number: WP8182862
| Brand | Model Number | Description |
|---|---|---|
| Kenmore | 11045081404 | Washer |
| Kenmore | 11045087404 | Washer |
| Kenmore | 11045088404 | Washer |
| Kenmore | 11045089404 | Washer |
| Kenmore | 11045091404 | Washer |
| Kenmore | 11045862404 | Washer |
| Kenmore | 11045872404 | Washer |
| Kenmore | 11045962404 | Washer |
| Kenmore | 11045966404 | Washer |
| Kenmore | 11045972404 | Washer |
| Kenmore | 11045976404 | Washer |
| Kenmore | 11045986404 | Washer |
| Kenmore | 11045996404 | Washer |
| Kenmore | 11047081600 | Washer |
| Kenmore | 11047081601 | Washer |
| Kenmore | 11047081602 | Washer |
| Kenmore | 11047086600 | Washer |
| Kenmore | 11047086601 | Washer |
| Kenmore | 11047086602 | Washer |
| Kenmore | 11047087600 | Washer |
| Kenmore | 11047087601 | Washer |
| Kenmore | 11047087602 | Washer |
| Kenmore | 11047088600 | Washer |
| Kenmore | 11047088601 | Washer |
| Kenmore | 11047088602 | Washer |
| Kenmore | 11047089600 | Washer |
| Kenmore | 11047089601 | Washer |
| Kenmore | 11047089602 | Washer |
| Kenmore | 11047091600 | Washer |
| Kenmore | 11047091601 | Washer |
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.