Part Location Diagram of WP285655 Whirlpool Hose Clamp
See part 29 in the diagram
Replacing your Kenmore Washer Hose Clamp
( Grid squares measure 1x1 inch )

Hose Clamp

Works With Model ATW4675EW0!

Rated by 3 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$10.83
In Stock
Fix Number: FIX11740613
Manufacturer #: WP285655
Manufactured by: Whirlpool
Works With Model ATW4675EW0!

Product Description

This hose clamp is sold individually.

Videos For installing this part.

Replacing your Hose Clamp

Replacing your Hose Clamp

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.1 / 5.0, 3 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The drain hose had a hole in it and needed to be replaced
Removed the lower front panel, disconnected the hose and replaced it with the new one, then replace the panel. The most dificult part was getting my old self on the floor and unscrewing the panel nuts.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    David from Middletown, PA
  • Parts Used:
    WP213045, WP285655
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Slight leak in tub drain hose
Unplug unit from electrical outlet. Remove two Phillips screws in bottom of front cover. Swing front cover up and off the washer. Loosen both hose clamps. Place a large rag (or several paper towels) around base of hose where it connects to the water pump. Gently loosen bottom of hose from water pump and remove. Gently loosen top of hose from tub drain and remove. Slide new hose top onto tub drain. Slip both new clamps onto hose (lower clamp screw should be on the inside of the hose so that there is no interference with rotating parts). Slide new hose bottom onto water pump. Tighten both clamps snuggly. Re-install front cover. Plug unit back in.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    greg from new martinsville, WV
  • Parts Used:
    WP213045, WP285655
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Leaking
Just with a nut driver to tighten the clamp
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX11740613
Manufacturer Part Number: WP285655
Brand
Model Number
Description
Kenmore
101963580
Washer - Kenmore Washing Machine Model 101.963580 (101963580, 101 963580) Parts
Kenmore
101963581
Washer - Kenmore Washing Machine Model 101.963581 (101963581, 101 963581) Parts
Kenmore
101963582
Washer - Kenmore Washing Machine Model 101.963582 (101963582, 101 963582) Parts
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014102300
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer