Watch the install video
271094-1-M-GE-WH1X2721 -Selector Knob with Clip
Part Location Diagram of WH1X2721 GE Selector Knob with Clip
See part 29 in the diagram
Replacing your General Electric Washer Selector Knob with Clip
271094-1-S-GE-WH1X2721 -Selector Knob with Clip 360 view
( Grid squares measure 1x1 inch )
271094-1-S-GE-WH1X2721 -Selector Knob with Clip 271094-2-S-GE-WH1X2721 -Selector Knob with Clip 271094-1-S-GE-WH1X2721 -Selector Knob with Clip 360 view
Part Location Diagram of WH1X2721 GE Selector Knob with Clip Replacing your General Electric Washer Selector Knob with Clip

Selector Knob with Clip

Rated by 7 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$17.00
In Stock
Fix Number: FIX271094
Manufacturer #: WH1X2721
Manufactured by: GE
  • Product Description

    This is a genuine OEM replacement timer knob for your dryer. It is made of white plastic, and includes the metal clip that fits onto a D-shaped shaft. Replacing this part is an easy repair, simply pull off the damage knob and push the new one into place. You may need a pair of needle nose pliers if the old metal clip has stuck to the shaft instead of coming off with the knob.

  • Works with the following brands
    General Electric, Hotpoint
  • Works with the following products
    Washer, Dryer
  • Fixes the following symptoms
    Will Not Start, Noisy
  • Part Number Cross Reference
    Part# WH1X2721 replaces these:
    AP2044893, 2314, WH1X2721, WE01X10033, WE01X10038, WE01X10156, WE01X1207, WE01X1208, WE01X1228, WE01X2721, WE1X10033, WE1X10038, WE1X10156, WE1X1207, WE1X1208, WE1X1228, WE1X2721, WH01X1208, WH01X2721, WH1X1208
1 Installation Video
1 Related Part Questions and Answers
7 Installation Instructions Model Compatibility
Product Description Part Videos Questions and Answers Related Parts Installation Instructions Model Compatibility

Product Description

This is a genuine OEM replacement timer knob for your dryer. It is made of white plastic, and includes the metal clip that fits onto a D-shaped shaft. Replacing this part is an easy repair, simply pull off the damage knob and push the new one into place. You may need a pair of needle nose pliers if the old metal clip has stuck to the shaft instead of coming off with the knob.

  • Works with the following brands:
    General Electric, Hotpoint
  • Works with the following products:
    Washer, Dryer
  • Fixes the following symptoms:
    Will Not Start, Noisy
  • Part# WH1X2721 replaces these:
    AP2044893, 2314, WH1X2721, WE01X10033, WE01X10038, WE01X10156 ... Show more , WE01X1207, WE01X1208, WE01X1228, WE01X2721, WE1X10033, WE1X10038, WE1X10156, WE1X1207, WE1X1208, WE1X1228, WE1X2721, WH01X1208, WH01X2721, WH1X1208 Show less

Videos For installing this part.

Replacing your Selector Knob with Clip

Replacing your Selector Knob with Clip

Questions and Answers

Be the first to ask our experts a question about this part!

Rotary Start Switch
★★★★★
★★★★★
(1)
$53.32
Part Number: FIX268305
You will need to connect the brown wire to the number 1 terminal and the red to terminal 2. You will need to attach the wires labeled for the two prongs and the third is left and not used.
$53.32
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 7 reviews.
  • 1
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Nancy from Anaheim, CA
  • Parts Used:
    WH1X2721
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Start knob on dryer broken
Removed old knob andreplaced with new
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    WALTER from HARRISBURG, PA
  • Parts Used:
    WH1X2721, WE4X881
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Shaft on rotary start switch snapped off
Unlpug dryer remove cover with allen wrench twist switch to remove move leads (spade clips) to new switch and snap into place.Replace cover and plug in dryer -- Repair complete very easy!!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Cecilia from Sagamore Beach, MA
  • Parts Used:
    WH1X2721
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Dryer start dial - plastic on back broke off
easy, just took off broken old dial and inserted new one, video instructions were included with part.,
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob Stripped Out - Broke
Watched install video - snapped it on - problem fixed.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Ron from Glendale, CA
  • Parts Used:
    WE1M1067, WE1M504, WH1X2721
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Dryer drum making a noise when turning a heavy load
Replaced the Drum Bearing Slides. One had come out of position and was not bearing the load properly. Remove the two screws that secure the top in place. Remove the top. Remove the two screws holding the front in place. I place a small towel underneath each screw next to the drum to catch the screw in case I drop them. When you have the front of the dryer leaning away from the drum, replace the glides. Vacuum the lint build up in the fan area before assembling the dryer.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Marie from Palm Coast, FL
  • Parts Used:
    WH1X2721
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Wrench (Adjustable)
2 Selector knobs broken
Followed the instruction. Took off the old knob and clip. Snapped on new knob. Works great
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    tom from littleton, CO
  • Parts Used:
    WH1X2721
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
Replace rear drum bearing kit
I followed the video. The parts of the video where they do steps in the process but is not shown are the toughest. For instance, pre-threading the part with new nuts without a power tool was horrible. Attaching to the drum was not easy for one person to do. They skimmed over this.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Model Compatibility
This part works with the following models:
Fix Number: FIX271094
Manufacturer Part Number: WH1X2721
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
55325119
Washer
General Electric
56121T2WW
Washer
General Electric
56121T3WW
Washer
General Electric
56121T4WW
Washer
General Electric
56121T5WW
Washer
General Electric
56121T8WW
Washer
General Electric
56121TAWW
Washer
General Electric
56121TBWW
Washer
General Electric
56220T6WW
Washer
General Electric
56220T8WW
Washer
General Electric
56220TAWW
Washer
General Electric
56220TBWW
Washer
General Electric
56221T6WW
Washer
General Electric
57131T2WW
Washer
General Electric
57131T3WW
Washer
General Electric
57131T4WW
Washer
General Electric
57131T5WW
Washer
General Electric
57131T8WW
Washer
General Electric
57131TAWW
Washer
General Electric
57131TBWW
Washer
General Electric
57221T2WW
Washer
General Electric
57221T3WW
Washer
General Electric
57221T5WW
Washer
General Electric
58221T2WW
Washer
General Electric
58221T3WW
Washer
General Electric
58221T5WW
Washer
General Electric
58221T6WW
Washer
General Electric
58221T8WW
Washer