GE/GE_Thumb/00123865i04.gif
See part 603 in the diagram
( Grid squares measure 1x1 inch )

6-Rib Drive Belt

$ 21.27   In Stock
Fix Number: FIX1482278
Manufacturer #: WH01X10302
Manufactured by: GE

Product Description

This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.

Videos For installing this part.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.5 / 5.0, 5 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Leaking & very Noisy
    Watched the Video took parts off one by one got as far as the nut there there had a problem with it had to soak it in W D 40 then was able to get it off needed to buy a new Nut split ring broke when i took it off but i have ordered the parts a head of time all of the main parts were rusted bearings ,hub washer,so it was a good thing i got all of the main parts the belt was starting to show wear. got a new one but as for the loud noise I found that the Transmission bearing went bad so ill have to get a new one. The job was not all that hard the nut was the main problem the seal was a bit hard to get off so i the whole tub out of the Machine had it upside down and put a screw driver thru hole and pop it out that way the tub bearing was the same way flip tub over a pop it out from the front when seal was out found it works better that way then the way it shows in the Video put a little liquid of soap around edge of seal it goes on much better Hope all this helps you out
    7 of 7 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    noisy
    New shaft, belt and housing. Installation was going fine until went to install belt and IT was way to short .THANKS
    3 of 4 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Michael from Fort Worth, TX
    • Parts Used:
      WH01X10302
    • Difficulty Level:
      Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
    Broken Drive Belt on GE Washing Machine
    The repair was not that difficult. I was able to have my son spin the tub while I helped feed the belt onto the pulleys. I used a zip tie to hold the belt on the larger pulley. I didn't purchase the belt install tool, but if I was installing on my own and had no help, the tool would almost be mandatory. Took less than 10 minutes from the time I opened the front panel to running a new load of laundry.
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Helmuth from Moore, SC
    • Parts Used:
      WH01X10302
    • Difficulty Level:
      Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
    Broken Belt....
    Took the front off as shown in the video. Cleaned out all the old belt residue. Install the new belt per the video...Yes it is tight...but it can go on... very happy...I now have clean clothes...thanks
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Marie from Hilton Head Island, SC
    • Parts Used:
      WX05X20641, WH01X10302
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
    Washer wouldn't agitate or spin.
    Followed the directions on the video and couldn't get it on after several attempts. I am the original Ms. fix-it and got really upset because it looked so simple.. I had the belt install tool on and couldn't for the life of me figure out what I was doing wrong. Broke down and called my 6' plus son-in-law, he had it on in no time. He showed me how far back on the pulley you had to start guiding the belt onto the pulley and informed me that being 5'4" my arms weren't long enough to reach far enough back on the pulley to guide the belt on it early enough and it kept sliding off and going under the pulley and getting in a bind.. Instructional video was right on, I am just too short of a lady. SO IF YOUR A SHORT GREAT-GRANDMAMA DON'T BEAT YOUSELF UP, CALL A TALL PERSON.
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX1482278
      Manufacturer Part Number: WH01X10302
      Brand
      Model Number
      Description
      General Electric
      57431DCWW
      General Electric
      57441DCWW
      Washer
      General Electric
      57481DCWW
      Washer
      General Electric
      57751H0WW
      Washer
      General Electric
      57751H1WW
      General Electric
      57751H2WW
      General Electric
      57751H3WW
      Washer
      General Electric
      58971K0WW
      General Electric
      58971K2WW
      Washer
      General Electric
      58971K3WW
      Washer
      General Electric
      EJRR4170E6WW
      General Electric
      EWA4500DCWW
      General Electric
      EWA5600G0WW
      Washer
      General Electric
      EWA5600G1WW
      Washer
      General Electric
      EWA5600G2WW
      Washer
      General Electric
      EWA5600G3WW
      Washer
      General Electric
      EWA5600K0WW
      Washer
      General Electric
      EWA5600K1WW
      Washer
      General Electric
      EWA5600K2WW
      Washer
      General Electric
      EWA5600K3WW
      Washer
      General Electric
      EWA6500DCWW
      General Electric
      GBAN2800F0WW
      Washer - WASHER
      General Electric
      GBSR3140H1WW
      Washer
      General Electric
      GBSR3140H2WW
      Washer
      General Electric
      GBSR3140H3WW
      Washer
      General Electric
      GBSR3140H4WW
      Washer
      General Electric
      GBSR3140H5WW
      Washer
      General Electric
      GBSR3140H6WW
      Washer
      General Electric
      GBSR3140H7WW
      Washer
      General Electric
      GBSR3140H8WW
      Washer