Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Howard from Santa Rosa, CA
door ajar alarm
myself and it was easy , as the diy video described on your website
1 person found this instruction helpful.
Thank you for voting!
Broken door strike and hinges
It was so easy and quick first you remove the screws then you remove the door replace the old parts and there you have it your washer is up and running in no time this is a 5 to 10 min job and plus you save alot of money on repairs doing it yourself thanks i will be doing more business with you all
0 of 1 people found this instruction helpful.
Thank you for voting!
Beppo from Silverdale, WA
striker end tip broke inside the safety lock/door closer
the video that I watched the repairman did not show how to remove the ring around the bellow. That is the most important thing to do. I found out about the ring on You Tube. You need to add that step to the video or you won't be able to understand how to move bellow to get to safety lock
0 of 1 people found this instruction helpful.
Thank you for voting!
Jeri from Albuquerque, NM
Door is slightly bent. When repairman came he slammed the door and the door strike broke!
I ordered the part (door strike)from this site it came almost the next day and I unscrewed the broken door strike and screwed in the new door strike
0 of 1 people found this instruction helpful.
Thank you for voting!
Dryer door not locking & would not start
Removed two screws pulled damaged off and replaced with new.
0 of 1 people found this instruction helpful.
Thank you for voting!
The door srike broke. The machine wont turn on without it.
Very simple. 2 Phillips screws and youre done.
0 of 1 people found this instruction helpful.
Thank you for voting!
Vickie from Wapakoneta, OH
broke off the door latch which caused the door not to latch closed.
I unscrewed the two screws holding on the door latch. Replaced the latch with the new one I received and screwed it on by using the two screws I took out to remove the broken latch. All fixed!! Door latches!
0 of 1 people found this instruction helpful.
Thank you for voting!
Door latch was broken.
Removed two screws, replaced broken part with new one and screwed it back in. Extremely easy.
0 of 1 people found this instruction helpful.
Thank you for voting!
Door would not latch, thus machine would not start
Website helped me trouble shoot problem and a part under $10 solved the problem. I am very happy.
0 of 1 people found this instruction helpful.
Thank you for voting!
Mergeculture from Tampa, FL
Door strike broke
Removed the door strike with the screwdriver - I used a very old philips head screwdriver that was probably the worst. I placed the new strike on, and the door shut. The door is a bit saggy, and I have to lift up on it a little bit, but the strike replacement was simple and easy.. I'll worry about the door sagginess later.
0 of 1 people found this instruction helpful.
Thank you for voting!
Sorry, we couldn't find any existing installation instruction that matched.