Door Hinge with Bushings

Step 1, put the door inside facing up.
Step 2, remove Phillips head screws.
Step 3, remove cover, check for broken pieces of hinge.
Step 4, replace hinge, there is only one way to place it.
Step 5, screw the cover back on.
Step 6, mount it back onto the washer.

Removed door from washer. With door on flat surface all the screws are easily removed to replace striker & door hinge/ bushings. Pay attention to bushings position when removing so as to replace them in the same position. Video shows a guy pulling the door gasket off to replace the door lock & switch assembly. Skip that & remove the top cover from the washer. Only two screws in the back hold it on & it's a lot easier to reach inside & pull the switch up than fighting with the door gasket. With the new door hinge, door closes easier & more solid than when brand new. Easy fix.