OEM Amana Washer Drain Pump [27001233] | Ships Today | Fix.com
Drain Pump – Part Number: 27001233
Drain Pump – Part Number: 27001233 Drain Pump – Part Number: 27001233 Drain Pump – Part Number: 27001233 https://fixcom.azureedge.net/Schematics/Maytag/54314.gif

Drain Pump

Your Price

Fix Number: FIX1594294

Manufacturer #: 27001233

Manufactured by: Whirlpool

Part description

This pump is attached to the motor and helps expel water from the washing machine. It is activated after the spin speed is maintained for a specific period of time.

Works with the following brands

Amana, Crosley, Maytag, Speed Queen

Works with the following products

Washer

Fixes the following symptoms

Leaking | Will not drain | Pumps but will not spin | Noisy

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.3 / 5.0, 4 reviews
Customer:
John from Ames, IA
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Water leaking from bottom of washer, and belt burnt out due to age and overloading.
Found this youtube video of a Maytag washer that are the exact same parts and instructions to replace the water pump and belt. Fix it yourself and save!
7 of 8 people found these instructions helpful

Were these instructions helpful?   

Customer:
Toby from Kimbolton, OH
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Water leaking out the top of drain pump. Belt cracked and worn.
Took two screws out of front panel on bottom allows you to take the front cover off. Then removed four screws from the motor to be able to lift up and get to the bottom of the drain pump that has three screws holding it on, these are torque head screws. When pump is unbolted pump slide off and replaced belt,make note how belt is ran before taking off , now you can put new drain pump on and and hold in place while you get belt back on. Now you can bolt everything back the way you took off.
4 of 5 people found these instructions helpful

Were these instructions helpful?   

Customer:
ROSS from MANITOWOC, WI
Parts Used:
  • Drain Pump
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Socket set
Leaking pump
same way as the video just the way they described it
1 of 2 people found these instructions helpful

Were these instructions helpful?   

Customer:
Kim from Petaluma, CA
Parts Used:
  • Drain Pump
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set
Pump leaking
Took the front cover off of the washer and removed the motor from the washer , replaced the pump and the the belt then reinstalled the motor and the frount cover turned the washer on for a test it was so simple ?? . My washer is 17 years old and now it runs like a top I couldn't be happier ??
0 of 1 people found these instructions helpful

Were these instructions helpful?