Central Vacuum Parts & Repair Help

$7.68

Hose Clamp

Fix Number FIX11743008

Manufacturer Part Number WP596669

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.

Fixes these symptoms

Leaking
See more...

Installation Instructions

Albert from Unadilla, NY

noticed water was leaking in front of washer-right before we were leaving for vacation

Upon returning from vacation, we needed to do laundry-so I put some plastic under the washer and we did a load. The water was leaking from the seam between the lid and the back panel on the side with the hot and cold water connections- not the front. I removed two screws from the front bottom panel and two screws from the underside of the lid.Turning the washer on showed the leak was coming from the injection valve( it was brittle from age). The rubber injection valve was replaced and installed( using a little liquid soap to help the rubber hose to slip over the rubber injection valve) with a new clamp. The leak was fixed. Read more...

$19.11

Replacement Vac Bags

Fix Number FIX10431924

Manufacturer Part Number S391

$10.25

Dusting Brush

Fix Number FIX12067117

Manufacturer Part Number H-43414162

$23.94

Switch-Rocker

Fix Number FIX10432358

Manufacturer Part Number S99030342

$9.48

Hose Clamp

Fix Number FIX11743289

Manufacturer Part Number WP616099

Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.

Fixes these symptoms

Leaking
See more...

$8.27

Belt

Fix Number FIX12066424

Manufacturer Part Number H-38528036

$57.75

Water Pressure Hose - Cut-to-Fit

Fix Number FIX11741846

Manufacturer Part Number WP353244

This is the hose that tells your appliance if your tub is at the desired water level.

Installation Instructions

Shelli from Adams Center, NY

WASHER OVER FLOWING AT ANY SETTING

I WATCHED A VIDEO ON HOW TO TAKE THE FRONT AND SIDE PANEL OFF A UPRIGHT WASHING MACHINE FROM PARTSELECT.COM AND THEN HOW TO REPLACE A WATER PRESSURE SWITCH AND NEW PRESSURE HOSE. THE INSTALLATION ONLY REQUIRED TWO SCREW DRIVERS AND A PAIR OF SCISSORS TO CUT THE PRESSURE HOSE TO LENGTH THE SAME AS THE ONE REPLACED.SHUT THE WATER OFF AND UNHOCK THE HOSES AND UNPLUG THEN TWO SCREWS BEHIND THE MAIN TOP PANEL LEFT AND RIGHT SIDE. THE MAIN PANEL THEN FLIPS BACK. THEN WITH A FLAT SCREW DRIVER RELEASE THE TWO METAL SPRING BANDS ON LEFT AND RIGHT SIDE TOP. THE FRONT AND SIDES PANEL ALL TOGETHER LIFT OFF.NOW YOU CAN REPLACE WATER PRESSURE SWITCH AND PRESSURE HOSE. PUT BACK TOGETHER IN REVERSE AND HOOK UP WATER LINES AND PLUG IN TOOK ALL TOGETHER 30 TO 45 MINS. Read more...