Sorry, this part is No Longer Available at Fix.com, which means:
Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:
These replacement drive belts are specially designed for use with Oreck upright vacuums. It is a genuine OEM part, not an aftermarket imitation. Drive belt is used to spin the brush roller. Over time belts tend to stretch and wear out requiring replacement. It is advised to replace these belts every 6 months to ensure optimum performance. This pack includes three rubber belts per order. You will need a screwdriver to complete a repair job. • First make sure to unplug the vacuum • Remove the belt cover • Slide the belt off motor shaft • Lift and remove the brushroll • Place the new belt on motor shaft, then slip brushroll through belt • With belt in place, pull and slide brushroll into nozzle • Reassemble and test the new belt
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
