12040957-1-M-Kirby-K-118076-Commutator Carbon Brush
Part Location Diagram of K-118076 Kirby Commutator Carbon Brush
See part A-37 in the diagram
12040957-1-S-Kirby-K-118076-Commutator Carbon Brush 360 view
( Grid squares measure 1x1 inch )
12040957-1-S-Kirby-K-118076-Commutator Carbon Brush 12040957-1-S-Kirby-K-118076-Commutator Carbon Brush 360 view
Part Location Diagram of K-118076 Kirby Commutator Carbon Brush

Commutator Carbon Brush K-118076

$ 6.09
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX12040957
Manufacturer #:
K-118076
Manufactured by:
Kirby

Product Description

It is a genuine OEM item that is designed for use with Kirby vacuums. Brushes are responsible for transferring power to the motor's armature. Because they remain in constant contact with the spinning armature, the carbon motor brushes will eventually erode and will require replacement. Make sure to refer to the owner's manual and the appropriate diagrams for your model for the correct repair procedure. One durable carbon brush with an attached spring and a lead wire is included. A screwdriver will be needed to take out the old brush and secure the new one.

  • Works with the following brands:
    Kirby
  • Works with the following products:
    Upright Vacuum