Part Location Diagram of 530069969 Husqvarna Carburetor
See part D2 in the diagram
( Grid squares measure 1x1 inch )

Carburetor 530069969

$ 0.00
No Longer Available

No Longer Available

Sorry, this part is No Longer Available at Fix.com, which means:

  • The part is no longer sold by the manufacturer.
  • The manufacturer does not stock any substitute parts to replace this one and therefore, unfortunately, we cannot obtain or recommend a substitution for this part.
  • We cannot obtain the part through any other means.

Our call center and online agents are, unfortunately, unable to help you locate this part, but you may still be able to find the part elsewhere. We recommend:

  • Typing your part number into a search engine and checking to see whether another company might stock it.
  • Searching online stores like eBay for your part number.
  • Visiting a local appliance store or parts dealer to see if they have this part in stock.
  • Contacting a local technician, who may be able to repair your existing part or replace it with their own solution.
  • Contacting the manufacturer of your appliance directly to check for their recommendations.
Fix Number:
FIX12659662
Manufacturer #:
530069969
Manufactured by:
Husqvarna

Product Description

This carburetor repair kit is supplied by the original manufacturer for use in trimmers. The kit includes the diaphragm and carburetor gaskets, strainers, primer bulb, inlet needles, springs, and pins. It is normal for gaskets to wear down, brittle, or lose their sealing ability over time due to exposure to fuel, heat, and pressure. Faulty gaskets can result in loss of compression, inadequate lubrication, overheating, and engine damage due to fuel, oil, and air leakages. This complete kit allows you to repair your carburetor. Remove each faulty gasket and clean the mounting surfaces with a soft cloth or brush surfaces. It is recommended to lay all the parts out in order during disassembly, to make the installation process easier. Position the replacement parts in the appropriate position and ensure they are securely fitted before reassembling the rest of the carburetor.